GL.iNet Spitz Plus (GL-X2000) 4G Dual SIM Router

Dieses Artikel

…ist noch unter heftiger Bearbeitung !

Seit November fährt bei uns statt dem X750 der Spitz Plus bzw. GL-X2000 im Wohnmobil mit.

Es handelt sich um einen zimlich potenten Router mit:

Datenblatt Auszug

Laut Hersteller: https://www.gl-inet.com/products/gl-x2000/

Nicht im Datenblatt

The GL-X2000 is designed with 12V and 24V input environments in mind, such as Recreational Vehicles, offering a wide voltage input range of 9~36V and a 5.5×2.1mm DC adapter to ensure device compatibility and stability.

https://forum.gl-inet.com/t/power-connection-on-spitz-plus-gl-x2000/49471/11

Antenne

… und wenn Sie ein Loch in das Dach eines teuren Autos bohren, sollte es für eine längere Zeit dort sein! Kaufen Sie also eine 5G Antenne auch für Ihren 4G Router.

Montage: Wenn Ihr Auto oder Ihre Kabine aus Glasfaserkunststoff besteht, könnten Sie Ihre Antennen auch innen montieren, …

Wir verwenden FTS Complete Car 5G Antenne (Art-Nr: FTS 96173)
Gewindelänge: lang 7cm, Kabellänge: 2 Meter
Ausstattung: 4x CELL | 1x WLAN | 1x GP

Bilder

So wohnt er bei uns…

Fazit

Selbst mit der unfertigen Firmware hatten wir bisher sehr gute Erfahrungen mit dem Gerät:

Used Software

Model: GL.iNet X2000, Inc. IPQ5018/AP-MP03.5-C1

Architecture: ARMv8 Processor rev 4

Firmware Version: OpenWrt 19.07-SNAPSHOT r0-8e3381471 / LuCI branch git-24.354.42185-458ae00

Kernel Version: 5.4.213

Installation Syncthing

The Package from GL.iNet is defect,so i selected the newest working packacke…

mkdir /tmp/xx
opkg update
opkg install mc
opkg install syncthing
cp /etc/init.d/syncthing /tmp/xx/init.d
cp /etc/config/syncthing /tmp/xx/config
opkg renove syncthing
#Well selected Version… Older makes trouble, newer dont start on my device…
W	wget https://github.com/syncthing/syncthing/releases/download/v1.28.1/syncthing-linux-arm64-v1.28.1.tar.gzmv 
…
Cp syncthing /usr/bin/syncthing 
chmod +x /usr/bin/syncthing

/etc/init.d/syncthing enable; /etc/init.d/syncthing start

Aus <https://forum.gl-inet.com/t/does-any-one-successfully-setup-syncthing-on-axt-1800/24415/16> 



 ps -w | grep syncthing; service | grep syncthing

Kernel.log

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014]
[    0.000000] Linux version 5.4.213 (glinet@glinet) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r0-8e3381471)) #0 SMP PREEMPT Thu Dec 19 11:43:05 2024
[    0.000000] Machine model: GL.iNet X2000, Inc. IPQ5018/AP-MP03.5-C1
[    0.000000] OF: reserved mem: OVERLAP DETECTED!
[    0.000000] q6_code_data@4B000000 (0x000000004b000000--0x000000004b060000) overlaps with q6_mem_regions@4B000000 (0x000000004b000000--0x000000004fd00000)
[    0.000000] OF: reserved mem: OVERLAP DETECTED!
[    0.000000] q6_mem_regions@4B000000 (0x000000004b000000--0x000000004fd00000) overlaps with q6_ipq5018_data@4C400000 (0x000000004c400000--0x000000004d100000)
[    0.000000] On node 0 totalpages: 105728
[    0.000000]   DMA32 zone: 1652 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 105728 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] psci: OSI mode supported.
[    0.000000] percpu: Embedded 24 pages/cpu s59608 r8192 d30504 u98304
[    0.000000] pcpu-alloc: s59608 r8192 d30504 u98304 alloc=24*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 104076
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait swiotlb=1 coherent_pool=2M
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 394052K/422912K available (7294K kernel code, 530K rwdata, 2308K rodata, 576K init, 414K bss, 28860K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[    0.000000] GICv2m: range[mem 0x0b00b000-0x0b00bffc], SPI[480:511]
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000379] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000396] pid_max: default: 32768 minimum: 301
[    0.000579] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.000598] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.003124] ASID allocator initialised with 65536 entries
[    0.003329] rcu: Hierarchical SRCU implementation.
[    0.005641] smp: Bringing up secondary CPUs ...
[    0.006763] Detected VIPT I-cache on CPU1
[    0.006830] CPU1: Booted secondary processor 0x0000000001 [0x51af8014]
[    0.007012] smp: Brought up 1 node, 2 CPUs
[    0.007031] SMP: Total of 2 processors activated.
[    0.007043] CPU features: detected: 32-bit EL0 Support
[    0.007051] CPU features: detected: CRC32 instructions
[    0.007113] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.007122] CPU: All CPU(s) started at EL1
[    0.007434] alternatives: patching kernel code
[    0.018551] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.018581] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.018768] pinctrl core: initialized pinctrl subsystem
[    0.020460] NET: Registered protocol family 16
[    0.021260] DMA: preallocated 2048 KiB pool for atomic allocations
[    0.022068] cpuidle: using governor ladder
[    0.022123] cpuidle: using governor menu
[    0.022377] NET: Registered protocol family 42
[    0.022668] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.027920] gpiochip_find_base: found new base at 465
[    0.027956] gpio gpiochip0: (1000000.pinctrl): created GPIO range 0->46 ==> 1000000.pinctrl PIN 0->46
[    0.028158] gpio gpiochip0: (1000000.pinctrl): added GPIO chardev (254:0)
[    0.028254] gpiochip_setup_dev: registered GPIOs 465 to 511 on device: gpiochip0 (1000000.pinctrl)
[    0.107785] qcom,gcc-ipq5018 1800000.gcc: Registered ipq5018 GCC clocks provider
[    0.128031] msm_sps_probe: sps:sps is ready
[    1.982376] pps_core: LinuxPPS API ver. 1 registered
[    1.982387] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    1.982424] PTP clock support registered
[    1.983594] Advanced Linux Sound Architecture Driver Initialized.
[    1.983676] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    1.984980] clocksource: Switched to clocksource arch_sys_counter
[    1.986105] thermal_sys: Registered thermal governor 'step_wise'
[    1.986112] thermal_sys: Registered thermal governor 'user_space'
[    1.987295] NET: Registered protocol family 2
[    1.987523] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.988583] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    1.988631] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.988686] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    1.988768] TCP: Hash tables configured (established 4096 bind 4096)
[    1.988908] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.988937] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.989248] NET: Registered protocol family 1
[    1.989296] PCI: CLS 0 bytes, default 64
[    1.990324] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.991915] Initialise system trusted keyrings
[    1.992262] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    1.998450] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.998463] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.019379] Key type asymmetric registered
[    2.019394] Asymmetric key parser 'x509' registered
[    2.022388] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-export/cellular_power[0]' - status (0)
[    2.022616] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-export/cellular_reset[0]' - status (0)
[    2.022811] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-export/usb_port_power[0]' - status (0)
[    2.022977] gpio-export gpio-export: 3 gpio(s) exported
[    2.025457] bam-dma-engine 704000.dma: num-channels unspecified in dt
[    2.025476] bam-dma-engine 704000.dma: num-ees unspecified in dt
[    2.026379] bam-dma-engine 7884000.dma: qcom,controlled-remotely unspecified
[    2.027479] bam-dma-engine 7984000.dma: qcom,controlled-remotely unspecified
[    2.029794] CPU: IPQ5018, SoC Version: 1.1
[    2.029805] OEM_ID: 0, PROD_ID: 0
[    2.030579] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[    2.031900] 58000.qcom,msm-eud: ttyEUD0 at MMIO 0x0 (irq = 16, base_baud = 0) is a EUD UART
[    2.032634] msm_serial 78b0000.serial: msm_serial: detected port #1
[    2.032690] msm_serial 78b0000.serial: uartclk = 24000000
[    2.032762] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 14, base_baud = 1500000) is a MSM
[    2.033089] msm_serial 78af000.serial: msm_serial: detected port #0
[    2.033134] msm_serial 78af000.serial: uartclk = 1843199
[    2.033199] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 15, base_baud = 115199) is a MSM
[    2.033230] msm_serial: console setup on port #0
[    2.675287] printk: console [ttyMSM0] enabled
[    2.680325] msm_serial: driver initialized
[    2.684804] random: crng init done
[    2.699110] brd: module loaded
[    2.704107] loop: module loaded
[    2.706826] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xba
[    2.706851] nand: Winbond W25N01GWZEIG SPI NAND 1G 1.8V
[    2.712642] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    2.719270] qcom-nandc 79b0000.qpic-nand: Error in reading max io macro clock from dts
[    2.725397] 13 fixed-partitions partitions found on MTD device qcom_nand.0
[    2.733128] Creating 13 MTD partitions on "qcom_nand.0":
[    2.740030] 0x000000000000-0x000000080000 : "0:SBL1"
[    2.746928] 0x000000080000-0x000000100000 : "0:MIBIB"
[    2.751941] 0x000000100000-0x000000140000 : "0:BOOTCONFIG"
[    2.756583] 0x000000140000-0x000000240000 : "0:QSEE"
[    2.762641] 0x000000240000-0x000000280000 : "0:DEVCFG"
[    2.767095] 0x000000280000-0x0000002c0000 : "0:CDT"
[    2.771953] 0x0000002c0000-0x000000340000 : "0:APPSBLENV"
[    2.777064] 0x000000340000-0x000000480000 : "0:APPSBL"
[    2.783297] 0x000000480000-0x000000580000 : "0:ART"
[    2.788170] 0x000000580000-0x000000600000 : "0:TRAINING"
[    2.792333] 0x000000600000-0x000000800000 : "CFG"
[    2.799597] 0x000000800000-0x000000a00000 : "log"
[    2.804034] 0x000000a00000-0x000008000000 : "rootfs"
[    2.920503] mtd: device 12 (rootfs) set to be root filesystem
[    2.920804] mtdsplit: no squashfs found in "rootfs"
[    2.926897] mdio_bus fixed-0: GPIO lookup for consumer reset
[    2.926908] mdio_bus fixed-0: using lookup tables for GPIO lookup
[    2.926917] mdio_bus fixed-0: No GPIO consumer reset found
[    3.147399] mdio_bus 88000.mdio: GPIO lookup for consumer reset
[    3.147408] mdio_bus 88000.mdio: using device tree for GPIO lookup
[    3.147431] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/mdio@88000[0]'
[    3.147449] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/mdio@88000[0]'
[    3.147461] mdio_bus 88000.mdio: using lookup tables for GPIO lookup
[    3.147469] mdio_bus 88000.mdio: No GPIO consumer reset found
[    3.148007] mdio_bus 88000.mdio:07: GPIO lookup for consumer reset
[    3.148017] mdio_bus 88000.mdio:07: using device tree for GPIO lookup
[    3.148042] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/mdio@88000/ethernet-phy@0[0]'
[    3.148060] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/mdio@88000/ethernet-phy@0[0]'
[    3.148072] mdio_bus 88000.mdio:07: using lookup tables for GPIO lookup
[    3.148080] mdio_bus 88000.mdio:07: No GPIO consumer reset found
[    3.148239] qca-mdio 88000.mdio: qca-mdio driver was registered
[    3.365383] of_get_named_gpiod_flags: parsed 'phy-reset-gpio' property of node '/soc/mdio@90000[0]' - status (0)
[    3.365397] qca-mdio 90000.mdio: Reset PHY by GPIO 504
[    3.585671] mdio_bus 90000.mdio: GPIO lookup for consumer reset
[    3.585681] mdio_bus 90000.mdio: using device tree for GPIO lookup
[    3.585704] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/mdio@90000[0]'
[    3.585722] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/mdio@90000[0]'
[    3.585734] mdio_bus 90000.mdio: using lookup tables for GPIO lookup
[    3.585742] mdio_bus 90000.mdio: No GPIO consumer reset found
[    3.586318] mdio_bus 90000.mdio:04: GPIO lookup for consumer reset
[    3.586327] mdio_bus 90000.mdio:04: using device tree for GPIO lookup
[    3.586351] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/mdio@90000/ethernet-phy@0[0]'
[    3.586368] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/mdio@90000/ethernet-phy@0[0]'
[    3.586380] mdio_bus 90000.mdio:04: using lookup tables for GPIO lookup
[    3.586388] mdio_bus 90000.mdio:04: No GPIO consumer reset found
[    3.586732] qca-mdio 90000.mdio: qca-mdio driver was registered
[    3.697179] i2c /dev entries driver
[    3.698197] qcom-tsens 4a9000.thermal-sensor: tsens device is not enabled
[    3.700879] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
[    3.707202] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz
[    3.715050] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1008000 KHz
[    3.722733] qti_scm_restart_reason qti,scm_restart_reason: reset_reason : Power on Reset [0x20]
[    3.731125] sdhci: Secure Digital Host Controller Interface driver
[    3.739181] sdhci: Copyright(c) Pierre Ossman
[    3.745397] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.750303] 
[    3.750303] Version Rollback Feature Disabled
[    3.757809] remoteproc remoteproc0: cd00000.remoteproc is available
[    3.762317] remoteproc remoteproc1: 4ab000.remoteproc_pd1 is available
[    3.768511] remoteproc remoteproc2: cd00000.remoteproc:remoteproc_pd2 is available
[    3.774943] remoteproc remoteproc3: cd00000.remoteproc:remoteproc_pd3 is available
[    3.782290] coresight-tmc 6047000.tmc: failed to get flush cti, defer probe
[    3.789544] coresight-dynamic-funnel 6041000.funnel: Uses obsolete Coresight DT bindings
[    3.798784] coresight coresight-etm0: CPU0: ETM v4.0 initialized
[    3.804247] coresight-etm4x 619c000.etm: CPU0: (null) initialized
[    3.810832] coresight coresight-etm1: CPU1: ETM v4.0 initialized
[    3.816274] coresight-etm4x 619d000.etm: CPU1: (null) initialized
[    3.822606] coresight-stm 6002000.stm: coresight-stm : stm_register_device failed, probing deferred
[    3.828548] OF: graph: no port node found in /soc/cti@6010000
[    3.837501] OF: graph: no port node found in /soc/cti@6011000
[    3.843351] OF: graph: no port node found in /soc/cti@6012000
[    3.849119] OF: graph: no port node found in /soc/cti@6013000
[    3.854773] OF: graph: no port node found in /soc/cti@6014000
[    3.860579] OF: graph: no port node found in /soc/cti@6015000
[    3.866314] OF: graph: no port node found in /soc/cti@6016000
[    3.871968] OF: graph: no port node found in /soc/cti@6017000
[    3.877751] OF: graph: no port node found in /soc/cti@6018000
[    3.883420] OF: graph: no port node found in /soc/cti@6019000
[    3.889233] OF: graph: no port node found in /soc/cti@601a000
[    3.894886] OF: graph: no port node found in /soc/cti@601b000
[    3.900695] OF: graph: no port node found in /soc/cti@601c000
[    3.906403] OF: graph: no port node found in /soc/cti@601d000
[    3.912096] OF: graph: no port node found in /soc/cti@601e000
[    3.917872] OF: graph: no port node found in /soc/cti@601f000
[    3.923537] OF: graph: no port node found in /soc/cti@6198000
[    3.929338] OF: graph: no port node found in /soc/cti@6199000
[    3.935063] OF: graph: no port node found in /soc/cti@610c000
[    3.941962] OF: graph: no port node found in /soc/hwevent@6101000
[    3.946231] coresight-hwevent 6101000.hwevent: No csr data
[    3.952703] OF: graph: no port node found in /soc/csr@6001000
[    3.957828] coresight-csr 6001000.csr: CSR initialized: coresight-csr
[    3.965977] NET: Registered protocol family 10
[    3.971192] Segment Routing with IPv6
[    3.974281] NET: Registered protocol family 17
[    3.978134] Bridge firewalling registered
[    3.982275] 8021q: 802.1Q VLAN Support v1.8
[    3.986785] Loading compiled-in X.509 certificates
[    4.006745] sps_register_bam_device: sps:BAM 0x0000000006064000 is registered
[    4.008111] coresight coresight-stm: STM32 initialized
[    4.013210] ubi0: attaching mtd12
[    4.530447] ubi0: scanning is finished
[    4.537392] ubi0: attached mtd12 (name "rootfs", size 118 MiB)
[    4.537416] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.542108] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.549015] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.555844] ubi0: good PEBs: 944, bad PEBs: 0, corrupted PEBs: 0
[    4.562592] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
[    4.568864] ubi0: max/mean erase counter: 66/23, WL threshold: 4096, image sequence number: 1266442024
[    4.575893] ubi0: available PEBs: 0, total reserved PEBs: 944, PEBs reserved for bad PEB handling: 20
[    4.585212] ubi0: background thread "ubi_bgt0d" started, PID 80
[    4.597451] hctosys: unable to open rtc device (rtc0)
[    4.600896] ALSA device list:
[    4.605444]   No soundcards found.
[    4.611749] VFS: Mounted root (squashfs filesystem) readonly on device 31:15.
[    4.612121] Freeing unused kernel memory: 576K
[    4.645049] Run /sbin/init as init process
[    4.966568] init: Console is alive
[    4.966958] init: - watchdog -
[    7.053278] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    7.099931] install gl_hw_info
[    7.105088] Button Hotplug driver version 0.4.1
[    7.108718] exFAT: Version 1.2.9
[    7.112489] gl-tertf: (C) 2021 jianhui zhao <[email protected]>
[    7.114370] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/gpio_keys/reset@1[0]' - status (0)
[    7.114408] gpio-492 (reset): gpiod_set_debounce: missing set() or set_config() operations
[    7.117415] gl-kmwan: (C) 2023 chongjun luo <[email protected]>
[    7.119549] Memory check module loaded.
[    7.124749] Created /proc/gl_wd
[    7.128453] Created /proc/gl_wd_time
[    7.133456] bootconfig_partition_init: 0:BOOTCONFIG1 not found
[    7.137187] gl-fan_v2.0 gl_fan: install gl_fan
[    7.146088] SCSI subsystem initialized
[    7.153890] usbcore: registered new interface driver usbfs
[    7.153968] usbcore: registered new interface driver hub
[    7.158402] usbcore: registered new device driver usb
[    7.166146] usbcore: registered new interface driver usb-storage
[    7.170153] usbcore: registered new interface driver uas
[    7.175423] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    7.183072] init: - preinit -
[   10.358751] UBIFS (ubi0:3): Mounting in unauthenticated mode
[   10.359071] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 183
[   10.406976] UBIFS (ubi0:3): recovery needed
[   10.559901] UBIFS (ubi0:3): recovery completed
[   10.560105] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "rootfs_data"
[   10.563333] UBIFS (ubi0:3): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   10.571243] UBIFS (ubi0:3): FS size: 55361536 bytes (52 MiB, 436 LEBs), journal size 2793472 bytes (2 MiB, 22 LEBs)
[   10.581057] UBIFS (ubi0:3): reserved for root: 2614861 bytes (2553 KiB)
[   10.591289] UBIFS (ubi0:3): media format: w5/r0 (latest is w5/r0), UUID F4F98891-FDF5-4BA9-8BE9-15B9ABCCAF3C, small LPT model
[   10.601807] mount_root: switching to ubifs overlay
[   10.672582] urandom-seed: Seeding with /etc/urandom.seed
[   11.560983] procd: - early -
[   11.561119] procd: - watchdog -
[   12.175745] procd: - watchdog -
[   12.176270] procd: - ubus -
[   12.351496] procd: - init -
[   12.649547] cnss: INFO: IPC Logging is disabled!
[   12.660368] cnss[2]: INFO: Platform driver probed successfully. plat 0x00000000c6d4d857 tgt 0xfffc
[   12.665923] cnss[42]: INFO: Platform driver probed successfully. plat 0x000000004b8bdf37 tgt 0xfffb
[   12.680440] cnss: INFO: cnss_plat_ipc_qmi_svc_init: CNSS Platform IPC QMI Service is started
[   13.213307] urngd: v1.0.2 started.
[   13.435192] ubi: mtd12 is already attached to ubi0
[   13.475946] cnss: INFO: cnss_plat_ipc_qmi_reg_client_req_handler: QMI Client Connected. QMI Socket Node: 1 Port: 16392 ID: 1
[   13.475978] cnss: INFO: CNSS Daemon connected
[   13.497746] cnss: INFO: cnss_plat_ipc_qmi_init_setup_req_handler: MAC: 0 HW_TRC: 0 CAL: 2
[   13.817036] mtdoops: ready 0, 1 (no erase)
[   13.817045] mtdoops: Attached to MTD device 11
[   13.828053] ubi: mtd12 is already attached to ubi0
[   14.712236] kmodloader: loading kernel modules from /etc/modules.d/*
[   14.786473] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   15.195629] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   15.239850] platform regulatory.0: Direct firmware load for regulatory.db.p7s failed with error -2
[   15.239880] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db.p7s
[   15.284538] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   15.295883] NET: Registered protocol family 15
[   15.314119] ssdk_dt_parse_mac_mode[290]:INFO:mac mode1 doesn't exit!
[   15.314148] ssdk_dt_parse_mac_mode[298]:INFO:mac mode2 doesn't exit!
[   15.319902] of_get_named_gpiod_flags: can't parse 'phy-reset-gpio' property of node '/soc/mdio@88000[0]'
[   15.321872] Initializing XFRM netlink socket
[   15.339887] of_get_named_gpiod_flags: parsed 'phy-reset-gpio' property of node '/soc/mdio@90000[0]' - status (0)
[   15.339903] ssdk_dt_parse_port_bmp[871]:INFO:port_bmp doesn't exist!
[   15.339990] ssdk_dt_parse_led[1060]:INFO:current dts led_source_num is 1
[   15.399383] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[   17.854994] ssdk_mp_reset_init[839]:INFO:MP reset successfully!
[   17.855975] qca803x_phy_api_ops_init[2200]:INFO:qca probe qca803x phy driver succeeded!
[   17.859926] mpge_phy_api_ops_init[1092]:INFO:qca probe mpge phy driver succeeded!
[   18.229144] _adpt_mp_uniphy_clk_output_ctrl_set[255]:INFO:uniphy will output clock as 25000000Hz
[   18.474981] hsl_port_phy_gpio_reset[751]:INFO:GPIO504 reset PHY done
[   18.475223] ssdk_led_init[152]:INFO:ssdk_led_mode:3, ssdk_led_map:ffc, ssdk_led_src_id:0
[   18.480800] regi_init[4049]:INFO:Initializing SCOMPHY Done!!
[   18.488634] regi_init[4075]:INFO:qca-ssdk module init succeeded!
[   18.538746] tun: Universal TUN/TAP device driver, 1.6
[   18.549428] dp1: ppe offload disabled: 0 for macid 1
[   18.549454] dp1: Switch attached to macid 1 status: 0
[   18.553545] (unnamed net_device) (uninitialized): nss_dp_gmac: Registering netdev eth%d(qcom-id:1) with GMAC, mac_base: 0xffffffc010dd0000
[   18.560563] dp2: ppe offload disabled: 0 for macid 2
[   18.570894] dp2: Switch attached to macid 2 status: 0
[   18.576092] (unnamed net_device) (uninitialized): nss_dp_gmac: Registering netdev eth%d(qcom-id:2) with GMAC, mac_base: 0xffffffc010f90000
[   18.583523] **********************************************************
[   18.593293] * NSS Data Plane driver
[   18.599708] **********************************************************
[   18.623421] l2tp_core: L2TP core driver, V2.0
[   18.628068] l2tp_netlink: L2TP netlink interface
[   18.985192] nss_driver - fw of size 789564  bytes copied to load addr: 40000000, nss_id : 0
[   18.987905] Supported Frequencies - 
[   18.987909] 850 MHz 
[   18.992339] 1 GHz 
[   18.996231] 
[   19.000295] ffffffc008cd05c0: set sdma ffffff801c76a500
[   19.002166] node size 2 # items 4
[   19.006828] memory: 40000000 536870912 (avl 440324096) items 4 active_cores 1
[   19.010237] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[   19.017379] ffffffc008cd05c0: NSS core 0 DDR from 40000000 to 41000000
[   19.024255] ffffffc008cd05c0: meminfo init succeed
[   19.032134] ffffffc008cd05c0: All resources initialized and nss core0 has been brought out of reset
[   19.037834] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[   19.056831] nat46: module (version 1182f30785e4274913f01a8c3d7e1b5437ae3819) loaded.
[   19.062923] node size 2 # items 4
[   19.063650] memory: 40000000 536870912 (avl 440324096) items 4 active_cores 1
[   19.066947] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[   19.074012] ffffffc008cd05c0: nss core 0 booted successfully
[   19.081458] gre: GRE over IPv4 demultiplexor driver
[   19.089844] ip_gre: GRE over IPv4 tunneling driver
[   19.103103] ip6_gre: GRE over IPv6 tunneling driver
[   19.110873] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   19.146792] rmnet_nss_init(): initializing rmnet_nss
[   19.160731] PPP generic driver version 2.4.2
[   19.162953] NET: Registered protocol family 24
[   19.166824] PPTP driver version 0.8.5
[   19.242463] cryptodev: driver 1.10 loaded.
[   19.260199] openvswitch: Open vSwitch switching datapath
[   19.318298] nss_lag_init[352]:LAG Manager Installed
[   19.383016] diag: failed to find diag_dload imem node
[   19.393770] TRACK: P[0]	PMask[4]
[   19.393790] TRACK: P[1]	PMask[4]
[   19.396235] TRACK: P[2]	PMask[4]
[   19.400551] TRACK: P[3]	PMask[4]
[   19.402566] TRACK: P[4]	PMask[4]
[   19.405977] TRACK: P[5]	PMask[4]
[   19.408934] TRACK: P[6]	PMask[4]
[   19.421689] QCA multicast snooping installed successfully
[   19.426914] cannot find nss-macsec0 node
[   19.427183] nss-macsec1 DT exist!
[   19.430428] cannot find nss-macsec2 node
[   19.433522] cannot find nss-macsec3 node
[   19.437689] nss_macsec init success
[   19.448994] bt_driver 1943008.bt: bt_parse_ipc
[   19.449094] bt_driver 1943008.bt: bt_parse_mem
[   19.452465] bt_driver 1943008.bt: bt_parse_dt operating in secure mode
[   19.460699] remoteproc remoteproc4: bt_rproc_driver is available
[   19.463470] bt_rproc_driver bt_rproc_driver: Probed
[   19.488529] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/leds/led@28[0]' - status (0)
[   19.488567] no flags found for gpios
[   19.488857] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/leds/led@32[0]' - status (0)
[   19.488891] no flags found for gpios
[   19.489190] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/leds/led@1[0]' - status (0)
[   19.489216] no flags found for gpios
[   19.489453] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/leds/led@31[0]' - status (0)
[   19.489482] no flags found for gpios
[   19.489697] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/leds/led@44[0]' - status (0)
[   19.489723] no flags found for gpios
[   19.489977] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/leds/led@24[0]' - status (0)
[   19.490010] no flags found for gpios
[   19.490254] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/leds/led@17[0]' - status (0)
[   19.490284] no flags found for gpios
[   19.490495] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/leds/led@19[0]' - status (0)
[   19.490520] no flags found for gpios
[   19.526094] Mirror/redirect action on
[   19.543464] u32 classifier
[   19.543490]     input device check on
[   19.545219]     Actions configured
[   19.568303] GACT probability on
[   19.578056] Simple TC action Loaded
[   19.624870] fuse: init (API version 7.31)
[   19.629447] dwc3-qcom 8af8800.usb3: GPIO lookup for consumer device-power
[   19.629458] dwc3-qcom 8af8800.usb3: using device tree for GPIO lookup
[   19.629485] of_get_named_gpiod_flags: can't parse 'device-power-gpios' property of node '/soc/usb3@8A00000[0]'
[   19.629504] of_get_named_gpiod_flags: can't parse 'device-power-gpio' property of node '/soc/usb3@8A00000[0]'
[   19.629516] dwc3-qcom 8af8800.usb3: using lookup tables for GPIO lookup
[   19.629524] dwc3-qcom 8af8800.usb3: No GPIO consumer device-power found
[   19.643294] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   19.643370] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   19.734094] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010
[   19.734212] xhci-hcd xhci-hcd.0.auto: irq 120, io mem 0x08a00000
[   19.742710] libata version 3.00 loaded.
[   19.787588] usbcore: registered new interface driver cdc_acm
[   19.787619] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   19.798847] usbcore: registered new interface driver cdc_wdm
[   19.815244] usbcore: registered new interface driver ipheth
[   19.832871] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   19.841267] hub 1-0:1.0: USB hub found
[   19.841400] hub 1-0:1.0: 1 port detected
[   19.844767] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   19.848163] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   19.853407] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[   19.862142] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   19.868751] hub 2-0:1.0: USB hub found
[   19.876042] hub 2-0:1.0: 1 port detected
[   19.947200] nf_conntrack_rtsp v0.7 loading
[   19.983369] nf_nat_rtsp v0.7 loading
[   20.054798] PPP MPPE Compression module registered
[   20.108369] usbcore: registered new interface driver usbserial_generic
[   20.108478] usbserial: USB Serial support registered for generic
[   20.120825] wireguard: WireGuard 1.0.20220627 loaded. See www.wireguard.com for information.
[   20.120860] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
[   20.155195] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[   20.222083] xt_time: kernel timezone is -0000
[   20.232755] usbcore: registered new interface driver cdc_ether
[   20.245749] usbcore: registered new interface driver cdc_ncm
[   20.249732] usbcore: registered new interface driver huawei_cdc_ncm
[   20.264926] usbcore: registered new interface driver qmi_wwan
[   20.273090] usbcore: registered new interface driver rndis_host
[   20.293649] usbcore: registered new interface driver option
[   20.293782] usbserial: USB Serial support registered for GSM modem (1-port)
[   20.299481] kmodloader: done loading kernel modules from /etc/modules.d/*
[   20.405778] hub 1-1:1.0: USB hub found
[   20.406355] hub 1-1:1.0: 4 ports detected
[   20.495430] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[   20.526559] usb 2-1: LPM exit latency is zeroed, disabling LPM.
[   20.527268] usb 2-1: config 1 has an invalid interface number: 12 but max is 5
[   20.531358] usb 2-1: config 1 has no interface number 5
[   20.726877] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
[   20.734348] option 2-1:1.0: GSM modem (1-port) converter detected
[   20.734885] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
[   20.746088] option 2-1:1.1: GSM modem (1-port) converter detected
[   20.748012] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
[   20.761196] option 2-1:1.2: GSM modem (1-port) converter detected
[   20.762985] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
[   20.777355] option 2-1:1.3: GSM modem (1-port) converter detected
[   20.779245] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
[   20.821628] qmi_wwan 2-1:1.4: cdc-wdm0: USB WDM device
[   20.824164] qmi_wwan 2-1:1.4 wwan0: register 'qmi_wwan' at usb-xhci-hcd.0.auto-1, WWAN/QMI device, 36:f8:9f:9f:9a:fe
[   20.828269] option 2-1:1.12: GSM modem (1-port) converter detected
[   20.862132] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[   20.878150] scsi host0: usb-storage 1-1.1:1.0
[   20.975437] usb 1-1.3: new high-speed USB device number 4 using xhci-hcd
[   21.110754] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[   21.117289] scsi host1: usb-storage 1-1.3:1.0
[   21.311300] loading qca-wifi
[   21.946080] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0233 PQ: 0 ANSI: 0
[   21.953096] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   22.162555] scsi 1:0:0:0: Direct-Access     SanDisk  SDDR-B531        2920 PQ: 0 ANSI: 6
[   22.308115] ***** ACFG app not found: Fast boot is disabled *****
[   22.427532] sd 1:0:0:0: [sdb] 249872384 512-byte logical blocks: (128 GB/119 GiB)
[   22.431013] sd 1:0:0:0: [sdb] Write Protect is off
[   22.434666] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[   22.435912] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   22.460615]  sdb: sdb1
[   22.465580] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[   22.759034] ***** ACFG app not found: Fast boot is disabled *****
[   26.013145] configuring additional NSS pbufs
[   26.061513] additional pbufs of size 9003008 got added to NSS
[   29.037037] wlan: [2417:I:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: Could not find active PSOCs
[   29.037084] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 0
[   29.045550] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 1
[   29.061583] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 2
[   29.061738] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 3
[   29.071439] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 4
[   29.082180] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 0
[   29.087508] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 1
[   29.105622] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 2
[   29.105662] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 3
[   29.113193] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 4
[   29.131272] wlan: [2417:I:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: Could not find active PSOCs
[   29.131315] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 0
[   29.139614] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 1
[   29.148038] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 2
[   29.156932] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 3
[   29.164509] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 4
[   29.174186] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 0
[   29.181631] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 1
[   29.190023] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 2
[   29.199304] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 3
[   29.206944] wlan: [2417:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 4
[   29.228367] wlan: [2417:I:ANY] qdf_ini_parse: INI values read: 98
[   29.228443] wlan: [2417:I:ANY] qdf_ini_parse: INI file parse successful
[   29.249759] wlan: [2417:I:ANY] qdf_ini_parse: INI values read: 60
[   29.249801] wlan: [2417:I:ANY] qdf_ini_parse: INI file parse successful
[   30.144298] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 3 Instance ID: 0x41 Value: 1
[   30.144335] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x41 Param 3 Value: 1
[   30.155500] cnss: ERR: Failed to get plat_priv for instance_id 0x41
[   30.242311] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 3 Instance ID: 0x42 Value: 1
[   30.242419] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x42 Param 3 Value: 1
[   30.257375] cnss[42]: INFO: Setting cold_boot_support=1 for instance_id 0x42
[   30.802926] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 3 Instance ID: 0x2 Value: 1
[   30.803273] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x2 Param 3 Value: 1
[   30.815365] cnss[2]: INFO: Setting cold_boot_support=1 for instance_id 0x2
[   32.882202] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 6 Instance ID: 0x41 Value: 1
[   32.882238] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x41 Param 6 Value: 1
[   32.907110] cnss: ERR: Failed to get plat_priv for instance_id 0x41
[   33.039402] kmwan: sensitivity and mode are set.
[   33.062030] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 6 Instance ID: 0x42 Value: 1
[   33.062075] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x42 Param 6 Value: 1
[   33.073954] cnss[42]: INFO: Setting qdss_support=1 for instance_id 0x42
[   33.527043] ***** ACFG app not found: Fast boot is disabled *****
[   35.062239] smart_antenna: module license 'Proprietary' taints kernel.
[   35.062268] Disabling lock debugging due to kernel taint
[   35.124660] ./IPQ5018/regdb.bin ./qcn6122/regdb.bin
[   35.785908] wlan: [3797:I:ANY] =======ol_if_register_wifi3_0==========
[   35.785908] 
[   35.785956] wlan: [3797:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:00000000721a0a8a
[   35.792942] cnss[2]: ERR: cnss_register_subsys: Failed to get rproc handle 					    0 for device QCA5018
[   35.807586] remoteproc remoteproc1: powering up 4ab000.remoteproc_pd1
[   35.852207] remoteproc remoteproc1: Booting fw image IPQ5018/q6_fw.mdt, size 1820
[   35.852321] remoteproc remoteproc0: powering up cd00000.remoteproc
[   35.885096] remoteproc remoteproc0: Booting fw image IPQ5018/q6_fw.mdt, size 1820
[   35.885219] smem phyiscal address:0x4AB034A8
[   35.891644] failed to read userpd boot args ret:-22
[   36.331407] ECM init
[   36.331577] ECM database jhash random seed: 0xea9a38d2
[   36.446171] ECM init complete
[   36.594539] br-lan: port 1(eth1) entered blocking state
[   36.594574] br-lan: port 1(eth1) entered disabled state
[   36.602735] device eth1 entered promiscuous mode
[   36.652484] ECM OVS Test INIT
[   39.234475] Subsystem error monitoring/handling services are up
[   39.234633] qcom-q6-mpd cd00000.remoteproc: QDSP6SS Version : 0x20020000
[   39.302312] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, 000000004e745af1
[   39.306620] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 2
[   39.355141] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up
[   39.380341] Subsystem error monitoring/handling services are up
[   39.386153] cnss[2]: INFO: QMI WLFW service connected, state: 0x10001
[   39.416915] cnss[2]: INFO: FW INI CFG file IPQ5018/fw_ini_cfg.bin is present
[   39.416976] cnss[2]: INFO: device_id : 0xfffc mem mode : [1]
[   39.434262] cnss[2]: INFO: platform name: GL.iNet X2000, Inc. IPQ5018/AP-MP03.5-C1
[   39.436727] cnss[2]: INFO: FW File 0 download
[   39.448136] cnss[2]: ERR: WARNING: More memory is reserved. Reserved size 0xd00000, Requested size 0xc00000.
[   39.450996] cnss[2]: INFO: cnss_cal_db_mem_update: File Operation 1 size 2097152 file name wlfw_cal_01.bin
[   39.495124] remoteproc remoteproc1: remote processor 4ab000.remoteproc_pd1 is now up
[   39.495200] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffc, FW ready timeout: 60 seconds
[   39.509856] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x290d8012, fw_build_timestamp: 2023-10-27 11:42, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 0 rxgainlut_support 0
[   39.513320] cnss[2]: INFO: Downloading BDF: IPQ5018/regdb.bin, size: 24278
[   39.560887] cnss[2]: INFO: Downloading BDF: IPQ5018/bdwlan.b24, size: 131072
[   39.643907] cnss[2]: INFO: Downloading BDF: IPQ5018/caldata.bin, size: 131072
[   39.735117] cnss[2]: INFO: FW ready received for device 0xfffc
[   39.737635] cnss[2]: INFO: Sending mode message, mode: COLDBOOT CALIBRATION(7), state: 0x1000f
[   39.767470] cnss[42]: ERR: cnss_register_subsys: Failed to get rproc handle 					    0 for device QCN6122_2
[   39.767529] remoteproc remoteproc3: powering up cd00000.remoteproc:remoteproc_pd3
[   39.776453] cnss[2]: INFO: Coldboot Calbration wait started for Device: 0xfffc, timeout: 180 seconds
[   39.790099] remoteproc remoteproc3: Booting fw image IPQ5018/q6_fw.mdt, size 1820
[   39.796433] Subsystem error monitoring/handling services are up
[   39.891176] cnss[42]: INFO: QMI WLFW service connected, state: 0x10001
[   39.894589] cnss[42]: INFO: FW INI CFG file qcn6122/fw_ini_cfg.bin is present
[   39.898078] cnss[42]: INFO: device_id : 0xfffb mem mode : [1]
[   39.903904] cnss[42]: INFO: platform name: GL.iNet X2000, Inc. IPQ5018/AP-MP03.5-C1
[   39.915096] remoteproc remoteproc3: remote processor cd00000.remoteproc:remoteproc_pd3 is now up
[   39.924652] cnss[42]: INFO: Waiting for FW ready. Device: 0xfffb, FW ready timeout: 60 seconds
[   39.933802] cnss[42]: INFO: FW File 0 download
[   39.943816] cnss[42]: ERR: WARNING: More memory is reserved. Reserved size 0xd00000, Requested size 0xcc0000.
[   39.946814] cnss[42]: INFO: cnss_cal_db_mem_update: File Operation 1 size 5242880 file name wlfw_cal_01_QCN6122_2.bin
[   40.324826] cnss[42]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x290d8012, fw_build_timestamp: 2023-10-27 11:42, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 0 rxgainlut_support 0
[   40.328121] cnss[42]: INFO: Device BAR Info pa: 0xa1e00000, va: 0x00000000f9a5d60d, size: 0x200000
[   40.359838] cnss[42]: INFO: Downloading BDF: qcn6122/regdb.bin, size: 24278
[   40.387591] cnss[42]: INFO: Downloading BDF: qcn6122/bdwlan.b60, size: 131072
[   40.467723] cnss[42]: INFO: Downloading BDF: qcn6122/caldata_2.bin, size: 131072
[   40.655108] cnss[42]: INFO: FW ready received for device 0xfffb
[   40.660536] cnss[42]: INFO: Sending mode message, mode: COLDBOOT CALIBRATION(7), state: 0x1000f
[   40.708032] cnss[42]: INFO: Coldboot Calbration wait started for Device: 0xfffb, timeout: 180 seconds
[   42.881349] cnss[2]: INFO: Calibration took 3140 ms
[   42.881484] cnss[2]: INFO: Coldboot Calibration completed successfully for device 0xfffc
[   42.885404] cnss[2]: INFO: cnss_cal_db_mem_update: File Operation 0 size 221988 file name wlfw_cal_01.bin
[   42.893476] cnss: INFO: cnss_plat_ipc_qmi_file_upload: File name: wlfw_cal_01.bin Size: 221988
[   43.035076] cnss[2]: INFO: Coldboot Calibration wait ended for device 0xfffc
[   43.035111] cnss[2]: INFO: Sending mode message, mode: OFF(4), state: 0x10007
[   43.047269] cnss[2]: INFO: QMI WLFW service disconnected, state: 0x10006
[   43.174652] remoteproc remoteproc1: stopped remote processor 4ab000.remoteproc_pd1
[   43.174699] cnss[2]: INFO: __cnss_subsystem_get: driver_state: 0x0
[   43.202155] remoteproc remoteproc1: powering up 4ab000.remoteproc_pd1
[   43.230350] remoteproc remoteproc1: Booting fw image IPQ5018/q6_fw.mdt, size 1820
[   43.230515] wlan: [928:I:ANY] ol_ath_wifi_ssr: SSR event 2 bus_type 1
[   43.306676] Subsystem error monitoring/handling services are up
[   43.311573] cnss[2]: INFO: QMI WLFW service connected, state: 0x1
[   43.351638] cnss[2]: INFO: FW INI CFG file IPQ5018/fw_ini_cfg.bin is present
[   43.351694] cnss[2]: INFO: device_id : 0xfffc mem mode : [1]
[   43.365313] cnss[2]: INFO: platform name: GL.iNet X2000, Inc. IPQ5018/AP-MP03.5-C1
[   43.368991] cnss[2]: INFO: FW File 0 download
[   43.421258] cnss[2]: ERR: WARNING: More memory is reserved. Reserved size 0xd00000, Requested size 0xc00000.
[   43.425509] wlan: [928:I:ANY] ol_ath_wifi_ssr: SSR event 3 bus_type 1
[   43.431192] wlan: [928:I:ANY] ol_ath_wifi_ssr: Waiting for probe lock
[   43.438078] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x290d8012, fw_build_timestamp: 2023-10-27 11:42, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 0 rxgainlut_support 0
[   43.461774] wlan: [928:I:ANY] ol_ath_wifi_ssr: Starting Driver Probe
[   43.476419] cnss[2]: INFO: Downloading BDF: IPQ5018/regdb.bin, size: 24278
[   43.512328] cnss[2]: INFO: Downloading BDF: IPQ5018/bdwlan.b24, size: 131072
[   43.537512] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffc, FW ready timeout: 60 seconds
[   43.581585] tertf: br-lan registered, add it
[   43.668192] cnss[2]: INFO: Downloading BDF: IPQ5018/caldata.bin, size: 131072
[   43.895229] cnss[2]: INFO: FW ready received for device 0xfffc
[   43.895719] wlan: [928:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode 
[   43.906601] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7
[   43.924318] wlan: [928:I:ANY] qca_napi_create: napi instance 0 created on pipe 4
[   43.926295] wlan: [928:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[   44.038766] wlan: [928:I:ANY] qdf_ini_parse: INI values read: 0
[   44.041474] wlan: [928:I:ANY] qdf_ini_parse: INI file parse fail: invalid file format
[   44.043628] wlan: [928:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCA5018.ini; status:4
[   44.161763] wlan: [928:I:ANY] qdf_ini_parse: INI values read: 73
[   44.161813] wlan: [928:I:ANY] qdf_ini_parse: INI file parse successful
[   44.176264] wlan: [928:I:ANY] qdf_ini_section_parse: INI values parse successful read: 4 from section DP_MON_2CHAIN
[   44.218924] wlan: [928:I:ANY] qdf_ini_section_parse: INI values parse successful read: 4 from section 1G-TX-DESC
[   44.219334] wlan: [928:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc 29
[   44.230004] wlan: [928:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 3 Target Type 1d 
[   44.342031] wlan: [928:I:ANY] ol_target_init_complete: CDP soc attach success
[   44.342078] wlan: [928:I:ANY] ol_target_init_complete: Soc attach success NSS config 0 
[   44.361228] wlan: [4318:I:TIF] HE_CAP Info = 9a08010d
[   44.361273] wlan: [4318:I:TIF] Num HW modes = 1
[   44.366198] wlan: [4318:I:TIF] Num PHY = 1
[   44.394162] wlan: [4318:I:TIF] FW Build Version (Ext.) = 268435456
[   44.394203] wlan: [4318:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0
[   44.399680] wlan: [4318:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[   44.430671] wlan: [4318:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[   44.430724] wlan: [4318:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[   44.505462] wlan: [4318:I:ANY] BDF version: 1 CAL version: 1 Status: 0
[   44.505524] wlan: [4318:E:TIF] tgt_if_set_reg_afc_configure: service afc support not enable
[   44.512758] wlan: [4318:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[   44.565728] wlan: [4318:I:ANY] qdf_ini_section_parse: INI values parse successful read: 2 from section 1G-2G
[   44.565852] wlan: [4318:I:TIF] ol_ath_ema_init_ctx: Limit max_mgmt_frm_sz to 1.5K for target_type:29
[   44.605124] wlan: [4318:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override:0
[   44.605164] wlan: [4318:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override & RNR_SIZE_LIMIT_OVERRIDE_MASK:>0
[   44.612011] wlan: [4318:I:MBSSIE] ol_ath_ema_init_ctx: mbss_ie_enable :0x0 
[   44.675256] wlan: [4318:I:MBSSIE] ol_ath_ema_init_ctx: max_pp: 1
[   44.675302] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.730378] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.730477] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.817287] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.817339] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.834926] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.836590] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.861542] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.861604] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.895588] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.895643] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.909366] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.914699] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.935182] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.935224] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.944851] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   44.982846] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_low: 0x77777777
[   44.982887] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_high: 0x77777777
[   44.992143] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size_limit: 128
[   45.001277] wlan: [4318:I:MBSSIE] ol_ath_ema_sanitize_optional_ie_config: optional_ie_size_limit: 166
[   45.010117] wlan: [4318:I:MBSSIE] ol_ath_ema_init_ctx:  max_pp:1  max_ngroups:1 
[   45.019292] wlan: [4318:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max mgmt frame size :1500
[   45.026980] wlan: [4318:I:MBSSIE] ol_ath_ema_determine_max_ngroup: common_part_sz      :800
[   45.036574] wlan: [4318:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz       :700
[   45.043652] wlan: [4318:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz_limit :294
[   45.056689] wlan: [4318:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_pp              :1
[   45.059541] wlan: [4318:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_1_bcn:   2
[   45.068198] wlan: [4318:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_pp_bcns: 2
[   45.076608] wlan: [4318:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_vaps_in_1_grp:      2
[   45.085268] wlan: [4318:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_ngroup:               8
[   45.105346] wlan: [4318:I:MBSSIE] ol_ath_ema_determine_max_ngroup: grp_sz:                   2
[   45.105392] wlan: [4318:I:MBSSIE] ol_ath_ema_init_ctx: rnr_6ghz_adv_override:0
[   45.121895] wlan: [4318:I:ANY] qdf_ini_section_parse: INI values parse successful read: 0 from section SINGLE_PHY_2G
[   45.121970] wlan: [4318:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   45.139870] wlan: [4318:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   45.139918] wlan: [4318:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   45.155264] wlan: [4318:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   45.155320] wlan: [4318:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   45.233210] wlan: [4318:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   45.233268] wlan: [4318:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   45.266355] wlan: [4318:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   45.266423] wlan: [4318:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   45.296627] wlan: [4318:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   45.345042] wlan: [4318:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   45.345121] wlan: [4318:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   45.352563] wlan: [4318:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   45.391681] wlan: [4318:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   45.391735] wlan: [4318:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   45.438692] wlan: [4318:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   45.439687] wlan: [4318:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   45.455107] wlan: [4318:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[   46.003282] wlan: [4318:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[   46.015748] wlan: [928:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d
[   46.015807] wlan: [928:E:NSS] [nss-wifili]: pdev:000000009dda6f1f radio_ifnum:28 scheme_id:1 radio_priority:0 
[   46.089077] wlan: [928:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL
[   46.103287] wlan: [928:I:MSCS] qca_mscs_module_init: 
[   46.103287] ****QCA MSCS Initialization Done**** SoC 00000000bdb266fc
[   46.103537] wlan: [928:I:ANY] __ol_ath_attach: soc(0x00000000bdb266fc): soc0 pdev: wifi0
[   46.134480] wlan: [928:I:ANY] ol_ath_cohost_bssid_ind_init: COHOSTED BSSID IND disabled for pdev[0]
[   46.134530] wlan: [928:I:TIF] ol_ath_pdev_regdmn_init:  phy id = 0 Modes supported
[   46.155536] wlan: [928:I:TIF] ol_ath_pdev_regdmn_init:  11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1
[   46.155583] wlan: [928:I:TIF] ol_ath_pdev_regdmn_init:  Reg cap - phy_id = 0 supp_bnd = 1, modes = 680680c, lo_2ghz = 2312, hi_2ghz = 2732 lo_5ghz = 0, hi_5ghz = 0
[   46.202220] wlan: [928:I:MBSSIE] ieee80211_mbss_attach: :>
[   46.202266] wlan: [928:I:MBSSIE] ieee80211_mbss_attach: :<ret:0
[   46.221603] wlan: [928:I:ANY] wlan_scan_update_channel_list: num_chan: 11
[   46.221806] of_get_named_gpiod_flags: can't parse 'led-gpio' property of node '/soc/wifi@c000000[0]'
[   46.221831] wlan: [928:E:ANY] ol_ath_pdev_attach: Error: LED GPIO is not configured!!
[   46.245426] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
[   46.248828] wlan: [928:I:ANY] ol_ath_pdev_host_trig_txbf_sounding_init: TxBF Standalone Sounding is not enabled
[   46.253066] wlan: [928:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[   46.357619] wlan: [928:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi0 features 41 
[   46.361661] wlan: [928:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[   46.375259] remoteproc remoteproc1: remote processor 4ab000.remoteproc_pd1 is now up
[   58.044476] EXT4-fs (sdb1): recovery complete
[   58.050904] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   63.351600] cnss[42]: INFO: Calibration took 22690 ms
[   63.351687] cnss[42]: INFO: Coldboot Calibration completed successfully for device 0xfffb
[   63.357590] cnss[42]: INFO: cnss_cal_db_mem_update: File Operation 0 size 1885092 file name wlfw_cal_01_QCN6122_2.bin
[   63.374642] cnss: INFO: cnss_plat_ipc_qmi_file_upload: File name: wlfw_cal_01_QCN6122_2.bin Size: 1885092
[   63.705105] cnss[42]: INFO: Coldboot Calibration wait ended for device 0xfffb
[   63.705139] cnss[42]: INFO: Sending mode message, mode: OFF(4), state: 0x10007
[   63.716958] cnss[42]: INFO: QMI WLFW service disconnected, state: 0x10026
[   63.896251] cnss[42]: INFO: Freeing BAR Info for QCN6122_2
[   63.896269] remoteproc remoteproc3: stopped remote processor cd00000.remoteproc:remoteproc_pd3
[   63.901285] cnss[42]: INFO: Previous target is probed
[   63.912534] cnss[42]: INFO: __cnss_subsystem_get: driver_state: 0x0
[   63.914607] remoteproc remoteproc3: powering up cd00000.remoteproc:remoteproc_pd3
[   63.928872] remoteproc remoteproc3: Booting fw image IPQ5018/q6_fw.mdt, size 1820
[   63.929013] wlan: [20:I:ANY] ol_ath_wifi_ssr: SSR event 2 bus_type 1
[   63.961503] Subsystem error monitoring/handling services are up
[   64.055595] cnss[42]: INFO: QMI WLFW service connected, state: 0x1
[   64.059917] cnss[42]: INFO: FW INI CFG file qcn6122/fw_ini_cfg.bin is present
[   64.060796] cnss[42]: INFO: device_id : 0xfffb mem mode : [1]
[   64.071908] cnss[42]: INFO: platform name: GL.iNet X2000, Inc. IPQ5018/AP-MP03.5-C1
[   64.074343] cnss[42]: INFO: FW File 0 download
[   64.075122] wlan: [20:I:ANY] ol_ath_wifi_ssr: SSR event 3 bus_type 1
[   64.088606] wlan: [20:I:ANY] ol_ath_wifi_ssr: Waiting for probe lock
[   64.092673] cnss[42]: ERR: WARNING: More memory is reserved. Reserved size 0xd00000, Requested size 0xcc0000.
[   64.093833] wlan: [2410:E:ANY] send_filled_buffers_to_user: Send Failed -3 drop_count = 1
[   64.112676] wlan: [20:I:ANY] ol_ath_wifi_ssr: Starting Driver Probe
[   64.112768] cnss[42]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x290d8012, fw_build_timestamp: 2023-10-27 11:42, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 0 rxgainlut_support 0
[   64.116560] cnss[42]: INFO: Waiting for FW ready. Device: 0xfffb, FW ready timeout: 60 seconds
[   64.147971] cnss[42]: INFO: Device BAR Info pa: 0xa1e00000, va: 0x0000000066cf5c3f, size: 0x200000
[   64.157376] cnss[42]: INFO: Downloading BDF: qcn6122/regdb.bin, size: 24278
[   64.183946] cnss[42]: INFO: Downloading BDF: qcn6122/bdwlan.b60, size: 131072
[   64.249390] cnss[42]: INFO: Downloading BDF: qcn6122/caldata_2.bin, size: 131072
[   64.385083] cnss[42]: INFO: FW ready received for device 0xfffb
[   64.385531] wlan: [20:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode 
[   64.395802] cnss[42]: INFO: Sending mode message, mode: MISSION(0), state: 0x7
[   64.414585] cnss[42]: INFO: Starting QDSS for QCN6122_2
[   64.414617] cnss[42]: INFO: Sending QDSS config download message, state: 0x7
[   64.419109] cnss[42]: INFO: No Custom QDSS config found, loading default file qcn6122/qdss_trace_config.bin
[   64.439650] wlan: [20:I:ANY] qca_napi_create: napi instance 0 created on pipe 4
[   64.440636] wlan: [20:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[   64.446363] cnss[42]: INFO: Sending QDSS Mode 1, option 0
[   64.477504] wlan: [20:I:ANY] qdf_ini_parse: INI values read: 0
[   64.481973] wlan: [20:I:ANY] qdf_ini_parse: INI file parse fail: invalid file format
[   64.505194] wlan: [20:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCN6122.ini; status:4
[   64.542389] wlan: [20:I:ANY] qdf_ini_parse: INI values read: 69
[   64.542430] wlan: [20:I:ANY] qdf_ini_parse: INI file parse successful
[   64.548973] wlan: [20:I:ANY] qdf_ini_section_parse: INI values parse successful read: 4 from section DP_MON_2CHAIN
[   64.559731] wlan: [20:I:ANY] qdf_ini_section_parse: INI values parse successful read: 2 from section 1G-TX-DESC
[   64.564180] debugfs: Directory 'CONFIG' with parent 'qdf' already present!
[   64.585249] wlan: [20:E:QDF] CONFIG creation failed
[   64.585616] wlan: [20:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc 30
[   64.595586] wlan: [20:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 3 Target Type 1e 
[   64.714795] wlan: [20:I:ANY] ol_target_init_complete: CDP soc attach success
[   64.714849] wlan: [20:I:ANY] ol_target_init_complete: Soc attach success NSS config 0 
[   64.728981] wlan: [4525:I:TIF] HE_CAP Info = 9a08010d
[   64.729037] wlan: [4525:I:TIF] Num HW modes = 1
[   64.733766] wlan: [4525:I:TIF] Num PHY = 1
[   64.749491] wlan: [4525:I:TIF] FW Build Version (Ext.) = 268435456
[   64.749534] wlan: [4525:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0
[   64.762071] wlan: [4525:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[   64.762284] wlan: [4525:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[   64.771571] wlan: [4525:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[   64.796159] wlan: [4525:I:ANY] BDF version: 1 CAL version: 1 Status: 0
[   64.800366] wlan: [4525:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[   64.802098] wlan: [4525:I:ANY] qdf_ini_section_parse: INI values parse successful read: 2 from section 1G-5G
[   64.826407] wlan: [4525:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override:0
[   64.826456] wlan: [4525:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override & RNR_SIZE_LIMIT_OVERRIDE_MASK:>0
[   64.845147] wlan: [4525:I:MBSSIE] ol_ath_ema_init_ctx: mbss_ie_enable :0x0 
[   64.845187] wlan: [4525:I:MBSSIE] ol_ath_ema_init_ctx: max_pp: 1
[   64.851158] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.865960] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.867336] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.889281] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.889685] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.910440] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.910495] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.920173] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.929944] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.939888] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.950054] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.959920] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.970241] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.980225] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   64.990249] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   65.000263] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   65.010272] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_low: 0x77777777
[   65.020795] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_high: 0x77777777
[   65.030237] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size_limit: 128
[   65.039682] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_optional_ie_config: optional_ie_size_limit: 166
[   65.048451] wlan: [4525:I:MBSSIE] ol_ath_ema_init_ctx:  max_pp:1  max_ngroups:1 
[   65.057618] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max mgmt frame size :2000
[   65.065321] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: common_part_sz      :800
[   65.073362] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz       :1200
[   65.081699] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz_limit :294
[   65.090278] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_pp              :1
[   65.098385] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_1_bcn:   4
[   65.106577] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_pp_bcns: 4
[   65.115592] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_vaps_in_1_grp:      4
[   65.123635] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_ngroup:               4
[   65.132488] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: grp_sz:                   4
[   65.140965] wlan: [4525:I:MBSSIE] ol_ath_ema_init_ctx: rnr_6ghz_adv_override:0
[   65.149713] wlan: [4525:I:ANY] qdf_ini_section_parse: INI values parse successful read: 0 from section SINGLE_PHY_5G
[   65.157224] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   65.169911] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   65.174558] wlan: [4525:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   65.183363] wlan: [4525:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   65.192061] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   65.199936] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   65.207226] wlan: [4525:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   65.214071] wlan: [4525:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   65.223554] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   65.233378] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   65.238241] wlan: [4525:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   65.246585] wlan: [4525:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   65.254257] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   65.263028] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   65.269763] wlan: [4525:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   65.277879] wlan: [4525:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   65.286851] wlan: [4525:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   65.294226] wlan: [4525:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[   65.583607] wlan: [4525:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[   65.595995] wlan: [20:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d
[   65.596054] wlan: [20:E:NSS] [nss-wifili]: pdev:000000001e87a093 radio_ifnum:29 scheme_id:0 radio_priority:1 
[   65.618281] wlan: [20:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL
[   65.625624] wlan: [20:I:ANY] __ol_ath_attach: soc(0x000000003120ff64): soc1 pdev: wifi1
[   65.700128] wlan: [20:I:ANY] ol_ath_cohost_bssid_ind_init: COHOSTED BSSID IND disabled for pdev[0]
[   65.700186] wlan: [20:I:TIF] ol_ath_pdev_regdmn_init:  phy id = 0 Modes supported
[   65.720721] wlan: [20:I:TIF] ol_ath_pdev_regdmn_init:  11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1
[   65.720774] wlan: [20:I:TIF] ol_ath_pdev_regdmn_init:  Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2ghz = 0, hi_2ghz = 0 lo_5ghz = 5150, hi_5ghz = 5895
[   65.746056] wlan: [20:I:MBSSIE] ieee80211_mbss_attach: :>
[   65.746106] wlan: [20:I:MBSSIE] ieee80211_mbss_attach: :<ret:0
[   65.766925] wlan: [20:I:ANY] wlan_scan_update_channel_list: num_chan: 25
[   65.767363] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
[   65.781822] wlan: [20:I:ANY] ol_ath_pdev_host_trig_txbf_sounding_init: TxBF Standalone Sounding is not enabled
[   65.782525] wlan: [20:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[   65.815542] wlan: [20:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi1 features 41 
[   65.820000] wlan: [20:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[   65.843900] remoteproc remoteproc3: remote processor cd00000.remoteproc:remoteproc_pd3 is now up
[   66.192583] wlan: [6470:F:DP] dp_rx_enable_mon_dest_frag: Feature DP_RX_MON_MEM_FRAG for mon_dest is enabled
[   66.512554] wlan: [6474:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:0 with soc_ops:0000000007ff096d
[   66.513207] wlan: [6474:I:ANY] init_ath_pci_2_0: 6ath_ol_pci_2_0:  (Atheros/multi-bss)
[   76.262592] ***** ACFG app not found: Fast boot is disabled *****
[   77.103393] wlan: [8155:I:ANY] pktlog_detach: ATH_PKTLOG[ wifi0 ] remove entry 000000005f147f52 root 00000000f2d879b2
[   77.103491] wlan: [8155:I:ANY] pktlog_detach: ATH_PKTLOG[ wifi1 ] remove entry 000000007d927b91 root 00000000f2d879b2
[   78.670470] wlan: [8231:I:ANY] ol_ath_wifi_ssr: SSR event 0 bus_type 1
[   78.670540] wlan: [8231:I:ANY] ol_ath_wifi_ssr: nss-wifi: soc_stop soc->soc_idx: 0 
[   78.683878] wlan: [8231:E:NSS] [nss-wifili]: sending soc stop message to NSS
[   79.423065] wlan: [8231:I:ANY] ol_ath_ahb_remove: Suspending Target - with disable_intr set :soc0 (sc 000000000d1e0742) soc=00000000bdb266fc
[   79.423130] wlan: [8231:I:ANY] wlan_pdev_operation: disable_target_intr val is 1
[   79.436696] wlan: [8231:I:ANY] ol_ath_ahb_remove: waiting for target paused event from target :soc0 (sc 000000000d1e0742)
[   79.443016] wlan: [8231:I:ANY] ol_ath_ahb_remove: AHB Call to nss detach 
[   79.455600] wlan: [8231:I:ANY] ol_ath_ahb_remove: Call to nss detach ops 00000000721a0a8a 
[   79.459819] wlan: [8231:I:ANY] ol_ath_ahb_remove: nss-wifi: detach 
[   79.469555] wlan: [8231:E:NSS] [nss-wifili]: sending soc stop message to NSS
[   80.102495] wlan: [8231:E:NSS] [nss-wifili]: calling pdev de-attach with id 0 
[   80.109801] wlan: [8231:E:NSS] nss-wifili: Free Host Pool Memory
[   80.111027] wlan: [8231:I:ANY] wlan_pdev_operation: soc_txrx_handle 000000007b567f39 dp_pdev id 0
[   80.117291] wlan: [8231:I:MBSSIE] ieee80211_mbss_detach: :>
[   80.123784] wlan: [8231:E:ANY] wlan_global_6ghz_pdev_destroy: Fatal error: Invalid l_soc_id for soc_id:0
[   80.129343] wlan: [8231:I:MBSSIE] ieee80211_mbss_detach: :<
[   80.140846] wlan: [8231:E:DIRECT_BUF_RX] target_if_deinit_dbr_ring: module(0) srng(0) was not initialized
[   80.145357] wlan: [8231:E:DIRECT_BUF_RX] target_if_deinit_dbr_ring: module(1) srng(0) was not initialized
[   80.156783] wlan: [8231:E:CFR] cfr_enh_deinit_pdev: Failed to register with dbr
[   80.163323] wlan: [8231:E:CFR] cfr_enh_deinit_pdev: Failed to unregister phase delta handler
[   80.171752] wlan: [8231:E:CFR] cfr_enh_deinit_pdev: Failed to unregister phase delta handler
[   80.179779] wlan: [8231:E:CFR] tgt_cfr_deinit_pdev: Error occurred with exit code 16
[   80.179779] 
[   80.188309] wlan: [8231:E:CFR] cfr_deinitialize_pdev: cfr_deinitialize_pdev status=16
[   80.188309] 
[   80.201464] wlan: [0:I:ANY] ol_ath_pdev_detach: remove global_ic[1]..gloabl_ic ptr:00000000233e3da9
[   80.206352] wlan: [8231:I:ANY] ieee80211_cfg80211_radio_detach: ieee80211_cfg80211_radio_detach: ic: 0x000000009dda6f1f, wdev: 0x000000007c3bdccb, netdev: 0x00000000db43a3a7 
[   80.357433] wlan: [8231:E:DIRECT_BUF_RX] target_if_deinit_dbr_ring: module(0) srng(0) was not initialized
[   80.357554] wlan: [8231:E:DIRECT_BUF_RX] target_if_deinit_dbr_ring: module(1) srng(0) was not initialized
[   80.425693] wlan: [8231:I:ANY] ol_ath_phyerr_detach: 6ol_ath_phyerr_detach: called
[   80.425781] wlan: [8231:I:MSCS] qca_mscs_module_deinit: 
[   80.425781] ****QCA MSCS De-Initialization Done**** SoC 00000000bdb266fc
[   80.432959] wlan: [8231:E:WMI] wmi_unified_unregister_event_handler: event handler is not registered: evt id 0x48001
[   80.450460] wlan: [8231:E:WMI] wmi_unified_unregister_event_handler: event handler is not registered: evt id 0x48005
[   81.048972] cnss[2]: INFO: Sending mode message, mode: OFF(4), state: 0x7
[   81.052318] cnss[2]: INFO: QMI WLFW service disconnected, state: 0x6
[   81.052741] wlan: [8231:I:ANY] ath_ahb_remove
[   81.206646] wlan: [8231:I:ANY] ol_ath_wifi_ssr: SSR event 1 bus_type 1
[   81.206708] remoteproc remoteproc1: stopped remote processor 4ab000.remoteproc_pd1
[   81.235364] wlan: [8231:I:ANY] ol_ath_wifi_ssr: SSR event 0 bus_type 1
[   81.235505] wlan: [8231:I:ANY] ol_ath_wifi_ssr: nss-wifi: soc_stop soc->soc_idx: 1 
[   81.240954] wlan: [8231:E:NSS] [nss-wifili]: sending soc stop message to NSS
[   82.037580] wlan: [8231:I:ANY] ol_ath_ahb_remove: Suspending Target - with disable_intr set :soc1 (sc 0000000072f0d0eb) soc=000000003120ff64
[   82.037644] wlan: [8231:I:ANY] wlan_pdev_operation: disable_target_intr val is 1
[   82.051145] wlan: [8231:I:ANY] ol_ath_ahb_remove: waiting for target paused event from target :soc1 (sc 0000000072f0d0eb)
[   82.059921] wlan: [8231:I:ANY] ol_ath_ahb_remove: AHB Call to nss detach 
[   82.076574] wlan: [8231:I:ANY] ol_ath_ahb_remove: Call to nss detach ops 00000000721a0a8a 
[   82.076621] wlan: [8231:I:ANY] ol_ath_ahb_remove: nss-wifi: detach 
[   82.095234] wlan: [8231:E:NSS] [nss-wifili]: sending soc stop message to NSS
[   83.055093] wlan: [8231:E:NSS] [nss-wifili]: calling pdev de-attach with id 0 
[   83.062802] wlan: [8231:E:NSS] nss-wifili: Free Host Pool Memory
[   83.064523] wlan: [8231:I:ANY] wlan_pdev_operation: soc_txrx_handle 00000000ca07c3e0 dp_pdev id 0
[   83.079641] wlan: [8231:I:MBSSIE] ieee80211_mbss_detach: :>
[   83.079684] wlan: [8231:E:ANY] wlan_global_6ghz_pdev_destroy: Fatal error: Invalid l_soc_id for soc_id:1
[   83.097007] wlan: [8231:I:MBSSIE] ieee80211_mbss_detach: :<
[   83.097244] wlan: [8231:I:ANY] acfg_detach: acfg_detach Netlink socket released
[   83.103625] wlan: [8231:E:DIRECT_BUF_RX] target_if_deinit_dbr_ring: module(0) srng(0) was not initialized
[   83.116663] wlan: [8231:E:DIRECT_BUF_RX] target_if_deinit_dbr_ring: module(1) srng(0) was not initialized
[   83.123160] wlan: [8231:E:CFR] cfr_enh_deinit_pdev: Failed to register with dbr
[   83.134132] wlan: [8231:E:CFR] cfr_enh_deinit_pdev: Failed to unregister phase delta handler
[   83.145146] wlan: [8231:E:CFR] cfr_enh_deinit_pdev: Failed to unregister phase delta handler
[   83.145197] wlan: [8231:E:CFR] tgt_cfr_deinit_pdev: Error occurred with exit code 16
[   83.145197] 
[   83.153992] wlan: [8231:E:CFR] cfr_deinitialize_pdev: cfr_deinitialize_pdev status=16
[   83.153992] 
[   83.175173] wlan: [0:I:ANY] ol_ath_pdev_detach: remove global_ic[0]..gloabl_ic ptr:00000000233e3da9
[   83.175243] wlan: [8231:I:ANY] ieee80211_cfg80211_radio_detach: ieee80211_cfg80211_radio_detach: ic: 0x000000001e87a093, wdev: 0x00000000950e4e34, netdev: 0x000000000ab58cf0 
[   83.327967] wlan: [8231:E:DIRECT_BUF_RX] target_if_deinit_dbr_ring: module(0) srng(0) was not initialized
[   83.328021] wlan: [8231:E:DIRECT_BUF_RX] target_if_deinit_dbr_ring: module(1) srng(0) was not initialized
[   83.385288] wlan: [8231:I:ANY] ol_ath_phyerr_detach: 6ol_ath_phyerr_detach: called
[   83.385395] wlan: [8231:E:WMI] wmi_unified_unregister_event_handler: event handler is not registered: evt id 0x48001
[   83.395142] wlan: [8231:E:WMI] wmi_unified_unregister_event_handler: event handler is not registered: evt id 0x48005
[   84.141357] cnss[42]: INFO: Sending mode message, mode: OFF(4), state: 0x20007
[   84.145103] cnss[42]: INFO: QMI WLFW service disconnected, state: 0x20006
[   84.146129] wlan: [8231:I:ANY] ath_ahb_remove
[   84.411333] remoteproc remoteproc0: stopped remote processor cd00000.remoteproc
[   84.411554] wlan: [8231:I:ANY] ol_ath_wifi_ssr: SSR event 1 bus_type 1
[   84.427467] cnss[42]: INFO: Freeing BAR Info for QCN6122_2
[   84.427495] remoteproc remoteproc3: stopped remote processor cd00000.remoteproc:remoteproc_pd3
[   84.492807] wlan: [8231:I:ANY] =======ol_if_unregister_wifi3_0==========
[   84.492807] 
[   84.757567] wlan: [9045:I:RPTR] qca_multi_link_deinit_module: 
[   84.757567] ******QCA RPtr De-Init Done***********
[   84.757567] 
[   85.035345] ***** ACFG app not found: Fast boot is disabled *****
[   90.205167] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   90.561253] wlan: [9802:I:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: Could not find active PSOCs
[   90.561307] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 0
[   90.569422] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 1
[   90.577589] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 2
[   90.586004] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 3
[   90.594375] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 4
[   90.602835] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 0
[   90.611262] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 1
[   90.619670] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 2
[   90.628105] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 3
[   90.636515] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 4
[   90.644897] wlan: [9802:I:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: Could not find active PSOCs
[   90.653364] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 0
[   90.662124] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 1
[   90.670542] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 2
[   90.678954] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 3
[   90.687385] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 4
[   90.695818] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 0
[   90.696013] wlan: [9797:E:ANY] send_filled_buffers_to_user: Send Failed -3 drop_count = 1
[   90.704178] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 1
[   90.704190] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 2
[   90.704205] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 3
[   90.704217] wlan: [9802:E:MLO_MGR] mlo_wsi_link_info_setup_mlo_grps: PSOC order 255, index 4
[   90.724438] wlan: [9802:I:ANY] qdf_ini_parse: INI values read: 98
[   90.754453] wlan: [9802:I:ANY] qdf_ini_parse: INI file parse successful
[   90.766720] wlan: [9802:I:ANY] qdf_ini_parse: INI values read: 60
[   90.766851] wlan: [9802:I:ANY] qdf_ini_parse: INI file parse successful
[   91.696655] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 3 Instance ID: 0x41 Value: 1
[   91.696698] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x41 Param 3 Value: 1
[   91.712489] cnss: ERR: Failed to get plat_priv for instance_id 0x41
[   91.818231] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 3 Instance ID: 0x42 Value: 1
[   91.818274] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x42 Param 3 Value: 1
[   91.833590] cnss[42]: INFO: Setting cold_boot_support=1 for instance_id 0x42
[   92.415396] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 3 Instance ID: 0x2 Value: 1
[   92.415492] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x2 Param 3 Value: 1
[   92.435055] cnss[2]: INFO: Setting cold_boot_support=1 for instance_id 0x2
[   93.986221] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 6 Instance ID: 0x41 Value: 1
[   93.986260] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x41 Param 6 Value: 1
[   94.004622] cnss: ERR: Failed to get plat_priv for instance_id 0x41
[   94.095178] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 6 Instance ID: 0x42 Value: 1
[   94.095224] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x42 Param 6 Value: 1
[   94.115071] cnss[42]: INFO: Setting qdss_support=1 for instance_id 0x42
[   95.793500] ./IPQ5018/regdb.bin ./qcn6122/regdb.bin
[   96.190008] wlan: [10691:I:ANY] =======ol_if_register_wifi3_0==========
[   96.190008] 
[   96.190065] wlan: [10691:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:00000000c69871c2
[   96.197470] remoteproc remoteproc1: powering up 4ab000.remoteproc_pd1
[   96.219276] remoteproc remoteproc1: Booting fw image IPQ5018/q6_fw.mdt, size 1820
[   96.219486] wlan: [10691:I:ANY] ol_ath_wifi_ssr: SSR event 2 bus_type 1
[   96.226007] remoteproc remoteproc0: powering up cd00000.remoteproc
[   96.232286] remoteproc remoteproc0: Booting fw image IPQ5018/q6_fw.mdt, size 1820
[   96.239408] smem phyiscal address:0x4AB034A8
[   96.246766] failed to read userpd boot args ret:-22
[   98.557808] Subsystem error monitoring/handling services are up
[   98.557887] qcom-q6-mpd cd00000.remoteproc: QDSP6SS Version : 0x20020000
[   98.611397] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 2
[   98.675102] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up
[   98.688169] Subsystem error monitoring/handling services are up
[   98.693871] cnss[2]: INFO: QMI WLFW service connected, state: 0x1
[   98.715394] cnss[2]: INFO: FW INI CFG file IPQ5018/fw_ini_cfg.bin is present
[   98.715501] cnss[2]: INFO: device_id : 0xfffc mem mode : [1]
[   98.721643] cnss[2]: INFO: platform name: GL.iNet X2000, Inc. IPQ5018/AP-MP03.5-C1
[   98.724003] cnss[2]: INFO: FW File 0 download
[   98.738502] cnss[2]: ERR: WARNING: More memory is reserved. Reserved size 0xd00000, Requested size 0xc00000.
[   98.746107] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x290d8012, fw_build_timestamp: 2023-10-27 11:42, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 0 rxgainlut_support 0
[   98.751869] cnss[2]: INFO: Downloading BDF: IPQ5018/regdb.bin, size: 24278
[   98.794034] cnss[2]: INFO: Downloading BDF: IPQ5018/bdwlan.b24, size: 131072
[   98.805170] wlan: [10691:I:ANY] ol_ath_wifi_ssr: SSR event 3 bus_type 1
[   98.805233] wlan: [10691:I:ANY] ol_ath_wifi_ssr: Waiting for probe lock
[   98.811198] wlan: [10691:I:ANY] ol_ath_wifi_ssr: Starting Driver Probe
[   98.817940] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffc, FW ready timeout: 60 seconds
[   98.881924] cnss[2]: INFO: Downloading BDF: IPQ5018/caldata.bin, size: 131072
[   99.055091] cnss[2]: INFO: FW ready received for device 0xfffc
[   99.055508] wlan: [10691:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode 
[   99.066531] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7
[   99.074222] wlan: [10691:I:ANY] qca_napi_create: napi instance 0 created on pipe 4
[   99.075422] wlan: [10691:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[   99.114107] wlan: [10691:I:ANY] qdf_ini_parse: INI values read: 0
[   99.114153] wlan: [10691:I:ANY] qdf_ini_parse: INI file parse fail: invalid file format
[   99.120096] wlan: [10691:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCA5018.ini; status:4
[   99.145617] wlan: [10691:I:ANY] qdf_ini_parse: INI values read: 73
[   99.145657] wlan: [10691:I:ANY] qdf_ini_parse: INI file parse successful
[   99.155615] wlan: [10691:I:ANY] qdf_ini_section_parse: INI values parse successful read: 4 from section DP_MON_2CHAIN
[   99.158896] wlan: [10691:I:ANY] qdf_ini_section_parse: INI values parse successful read: 4 from section 1G-TX-DESC
[   99.170079] wlan: [10691:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc 29
[   99.180495] wlan: [10691:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 3 Target Type 1d 
[   99.220366] wlan: [10691:I:ANY] ol_target_init_complete: CDP soc attach success
[   99.220422] wlan: [10691:I:ANY] ol_target_init_complete: Soc attach success NSS config 0 
[   99.228028] wlan: [4437:I:TIF] HE_CAP Info = 9a08010d
[   99.234824] wlan: [4437:I:TIF] Num HW modes = 1
[   99.240190] wlan: [4437:I:TIF] Num PHY = 1
[   99.244192] wlan: [4437:I:TIF] FW Build Version (Ext.) = 268435456
[   99.249304] wlan: [4437:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0
[   99.254540] wlan: [4437:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[   99.262112] wlan: [4437:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[   99.267934] wlan: [4437:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[   99.282260] wlan: [4437:I:ANY] BDF version: 1 CAL version: 1 Status: 0
[   99.290911] wlan: [4437:E:TIF] tgt_if_set_reg_afc_configure: service afc support not enable
[   99.299102] wlan: [4437:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[   99.306051] wlan: [4437:I:ANY] qdf_ini_section_parse: INI values parse successful read: 2 from section 1G-2G
[   99.312718] wlan: [4437:I:TIF] ol_ath_ema_init_ctx: Limit max_mgmt_frm_sz to 1.5K for target_type:29
[   99.323898] wlan: [4437:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override:0
[   99.332209] wlan: [4437:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override & RNR_SIZE_LIMIT_OVERRIDE_MASK:>0
[   99.339870] wlan: [4437:I:MBSSIE] ol_ath_ema_init_ctx: mbss_ie_enable :0x0 
[   99.350613] wlan: [4437:I:MBSSIE] ol_ath_ema_init_ctx: max_pp: 1
[   99.357429] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.363388] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.373498] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.383507] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.394303] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.404400] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.414451] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.423876] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.433820] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.443962] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.454826] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.464751] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.474889] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.485116] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.494548] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.505138] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   99.514718] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_low: 0x77777777
[   99.524529] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_high: 0x77777777
[   99.534324] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size_limit: 128
[   99.544620] wlan: [4437:I:MBSSIE] ol_ath_ema_sanitize_optional_ie_config: optional_ie_size_limit: 166
[   99.553467] wlan: [4437:I:MBSSIE] ol_ath_ema_init_ctx:  max_pp:1  max_ngroups:1 
[   99.562850] wlan: [4437:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max mgmt frame size :1500
[   99.570099] wlan: [4437:I:MBSSIE] ol_ath_ema_determine_max_ngroup: common_part_sz      :800
[   99.577685] wlan: [4437:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz       :700
[   99.587479] wlan: [4437:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz_limit :294
[   99.593765] wlan: [4437:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_pp              :1
[   99.602442] wlan: [4437:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_1_bcn:   2
[   99.610639] wlan: [4437:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_pp_bcns: 2
[   99.619379] wlan: [4437:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_vaps_in_1_grp:      2
[   99.628268] wlan: [4437:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_ngroup:               8
[   99.637275] wlan: [4437:I:MBSSIE] ol_ath_ema_determine_max_ngroup: grp_sz:                   2
[   99.645534] wlan: [4437:I:MBSSIE] ol_ath_ema_init_ctx: rnr_6ghz_adv_override:0
[   99.654126] wlan: [4437:I:ANY] qdf_ini_section_parse: INI values parse successful read: 0 from section SINGLE_PHY_2G
[   99.661407] wlan: [4437:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   99.671366] wlan: [4437:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   99.678744] wlan: [4437:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   99.686579] wlan: [4437:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   99.694911] wlan: [4437:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   99.702822] wlan: [4437:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   99.710316] wlan: [4437:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   99.717990] wlan: [4437:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   99.726517] wlan: [4437:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   99.734311] wlan: [4437:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   99.741842] wlan: [4437:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   99.750488] wlan: [4437:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   99.758096] wlan: [4437:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   99.766051] wlan: [4437:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   99.773375] wlan: [4437:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   99.781426] wlan: [4437:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   99.790506] wlan: [4437:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[   99.798512] wlan: [4437:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[   99.952714] wlan: [4437:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[   99.964396] wlan: [10691:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d
[   99.964456] wlan: [10691:E:NSS] [nss-wifili]: pdev:0000000023d0eed2 radio_ifnum:30 scheme_id:1 radio_priority:0 
[   99.984579] wlan: [10691:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL
[   99.985755] wlan: [10691:I:MSCS] qca_mscs_module_init: 
[   99.985755] ****QCA MSCS Initialization Done**** SoC 0000000067ab945a
[   99.991180] wlan: [10691:I:ANY] __ol_ath_attach: soc(0x0000000067ab945a): soc0 pdev: wifi0
[  100.007808] wlan: [10691:I:ANY] ol_ath_cohost_bssid_ind_init: COHOSTED BSSID IND disabled for pdev[0]
[  100.010861] wlan: [10691:I:TIF] ol_ath_pdev_regdmn_init:  phy id = 0 Modes supported
[  100.020766] wlan: [10691:I:TIF] ol_ath_pdev_regdmn_init:  11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1
[  100.032064] wlan: [10691:I:TIF] ol_ath_pdev_regdmn_init:  Reg cap - phy_id = 0 supp_bnd = 1, modes = 680680c, lo_2ghz = 2312, hi_2ghz = 2732 lo_5ghz = 0, hi_5ghz = 0
[  100.038395] wlan: [10691:I:MBSSIE] ieee80211_mbss_attach: :>
[  100.053456] wlan: [10691:I:MBSSIE] ieee80211_mbss_attach: :<ret:0
[  100.059991] wlan: [10691:I:ANY] wlan_scan_update_channel_list: num_chan: 11
[  100.064436] of_get_named_gpiod_flags: can't parse 'led-gpio' property of node '/soc/wifi@c000000[0]'
[  100.064468] wlan: [10691:E:ANY] ol_ath_pdev_attach: Error: LED GPIO is not configured!!
[  100.072291] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
[  100.074747] wlan: [10691:I:ANY] ol_ath_pdev_host_trig_txbf_sounding_init: TxBF Standalone Sounding is not enabled
[  100.088120] wlan: [10691:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[  100.097855] wlan: [10691:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi0 features 41 
[  100.117327] wlan: [10691:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[  100.121784] remoteproc remoteproc1: remote processor 4ab000.remoteproc_pd1 is now up
[  100.126654] remoteproc remoteproc3: powering up cd00000.remoteproc:remoteproc_pd3
[  100.145277] remoteproc remoteproc3: Booting fw image IPQ5018/q6_fw.mdt, size 1820
[  100.145532] wlan: [10691:I:ANY] ol_ath_wifi_ssr: SSR event 2 bus_type 1
[  100.163421] Subsystem error monitoring/handling services are up
[  100.258675] cnss[42]: INFO: QMI WLFW service connected, state: 0x1
[  100.261437] cnss[42]: INFO: FW INI CFG file qcn6122/fw_ini_cfg.bin is present
[  100.263770] cnss[42]: INFO: device_id : 0xfffb mem mode : [1]
[  100.275172] wlan: [10691:I:ANY] ol_ath_wifi_ssr: SSR event 3 bus_type 1
[  100.276765] wlan: [10691:I:ANY] ol_ath_wifi_ssr: Waiting for probe lock
[  100.276954] cnss[42]: INFO: platform name: GL.iNet X2000, Inc. IPQ5018/AP-MP03.5-C1
[  100.283369] cnss[42]: INFO: FW File 0 download
[  100.287430] wlan: [10691:I:ANY] ol_ath_wifi_ssr: Starting Driver Probe
[  100.297869] cnss[42]: ERR: WARNING: More memory is reserved. Reserved size 0xd00000, Requested size 0xcc0000.
[  100.306328] cnss[42]: INFO: Waiting for FW ready. Device: 0xfffb, FW ready timeout: 60 seconds
[  100.332469] cnss[42]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x290d8012, fw_build_timestamp: 2023-10-27 11:42, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 0 rxgainlut_support 0
[  100.336509] cnss[42]: INFO: Device BAR Info pa: 0xa1e00000, va: 0x00000000ef1afd70, size: 0x200000
[  100.367100] cnss[42]: INFO: Downloading BDF: qcn6122/regdb.bin, size: 24278
[  100.380464] cnss[42]: INFO: Downloading BDF: qcn6122/bdwlan.b60, size: 131072
[  100.447359] cnss[42]: INFO: Downloading BDF: qcn6122/caldata_2.bin, size: 131072
[  100.565112] cnss[42]: INFO: FW ready received for device 0xfffb
[  100.565524] wlan: [10691:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode 
[  100.575516] cnss[42]: INFO: Sending mode message, mode: MISSION(0), state: 0x7
[  100.595535] cnss[42]: INFO: Starting QDSS for QCN6122_2
[  100.595564] cnss[42]: INFO: Sending QDSS config download message, state: 0x7
[  100.600863] cnss[42]: INFO: No Custom QDSS config found, loading default file qcn6122/qdss_trace_config.bin
[  100.617012] wlan: [10691:I:ANY] qca_napi_create: napi instance 0 created on pipe 4
[  100.617847] wlan: [10691:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[  100.624230] cnss[42]: INFO: Sending QDSS Mode 1, option 0
[  100.627000] wlan: [10691:I:ANY] qdf_ini_parse: INI values read: 0
[  100.654831] wlan: [10691:I:ANY] qdf_ini_parse: INI file parse fail: invalid file format
[  100.654885] wlan: [10691:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCN6122.ini; status:4
[  100.733018] wlan: [10691:I:ANY] qdf_ini_parse: INI values read: 69
[  100.733061] wlan: [10691:I:ANY] qdf_ini_parse: INI file parse successful
[  100.747398] wlan: [10691:I:ANY] qdf_ini_section_parse: INI values parse successful read: 4 from section DP_MON_2CHAIN
[  100.749818] wlan: [10691:I:ANY] qdf_ini_section_parse: INI values parse successful read: 2 from section 1G-TX-DESC
[  100.766327] debugfs: Directory 'CONFIG' with parent 'qdf' already present!
[  100.767427] wlan: [10691:E:QDF] CONFIG creation failed
[  100.779092] wlan: [10691:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc 30
[  100.779364] wlan: [10691:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 3 Target Type 1e 
[  100.832675] wlan: [10691:I:ANY] ol_target_init_complete: CDP soc attach success
[  100.832839] wlan: [10691:I:ANY] ol_target_init_complete: Soc attach success NSS config 0 
[  100.844826] wlan: [4525:I:TIF] HE_CAP Info = 9a08010d
[  100.847896] wlan: [4525:I:TIF] Num HW modes = 1
[  100.852166] wlan: [4525:I:TIF] Num PHY = 1
[  100.861353] wlan: [4525:I:TIF] FW Build Version (Ext.) = 268435456
[  100.861393] wlan: [4525:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0
[  100.870203] wlan: [4525:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[  100.874654] wlan: [4525:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[  100.900315] wlan: [4525:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[  100.900428] wlan: [4525:I:ANY] BDF version: 1 CAL version: 1 Status: 0
[  100.912101] wlan: [4525:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[  100.916083] wlan: [4525:I:ANY] qdf_ini_section_parse: INI values parse successful read: 2 from section 1G-5G
[  100.927252] wlan: [4525:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override:0
[  100.932476] wlan: [4525:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override & RNR_SIZE_LIMIT_OVERRIDE_MASK:>0
[  100.947067] wlan: [4525:I:MBSSIE] ol_ath_ema_init_ctx: mbss_ie_enable :0x0 
[  100.950902] wlan: [4525:I:MBSSIE] ol_ath_ema_init_ctx: max_pp: 1
[  100.961587] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  100.964148] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  100.978142] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  100.983869] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  100.997520] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  101.004001] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  101.025273] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  101.025319] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  101.053310] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  101.053423] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  101.062770] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  101.073136] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  101.083005] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  101.096163] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  101.103142] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  101.113459] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[  101.123391] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_low: 0x77777777
[  101.133398] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_high: 0x77777777
[  101.142625] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size_limit: 128
[  101.152318] wlan: [4525:I:MBSSIE] ol_ath_ema_sanitize_optional_ie_config: optional_ie_size_limit: 166
[  101.161256] wlan: [4525:I:MBSSIE] ol_ath_ema_init_ctx:  max_pp:1  max_ngroups:1 
[  101.170649] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max mgmt frame size :2000
[  101.177554] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: common_part_sz      :800
[  101.186185] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz       :1200
[  101.194177] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz_limit :294
[  101.203395] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_pp              :1
[  101.210786] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_1_bcn:   4
[  101.219210] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_pp_bcns: 4
[  101.227739] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_vaps_in_1_grp:      4
[  101.236243] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_ngroup:               4
[  101.245039] wlan: [4525:I:MBSSIE] ol_ath_ema_determine_max_ngroup: grp_sz:                   4
[  101.253494] wlan: [4525:I:MBSSIE] ol_ath_ema_init_ctx: rnr_6ghz_adv_override:0
[  101.263596] wlan: [4525:I:ANY] qdf_ini_section_parse: INI values parse successful read: 0 from section SINGLE_PHY_5G
[  101.269296] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[  101.280145] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[  101.287370] wlan: [4525:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[  101.295671] wlan: [4525:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[  101.303488] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[  101.311547] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[  101.320193] wlan: [4525:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[  101.326699] wlan: [4525:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[  101.335835] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[  101.343440] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[  101.350824] wlan: [4525:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[  101.358420] wlan: [4525:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[  101.366976] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[  101.374712] wlan: [4525:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[  101.382437] wlan: [4525:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[  101.390889] wlan: [4525:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[  101.399441] wlan: [4525:E:TIF] soc_check_group_for_bridge_vdevs: Unable to get mlo group info!
[  101.406783] wlan: [4525:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[  101.694934] wlan: [4525:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[  101.705610] wlan: [10691:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d
[  101.705659] wlan: [10691:E:NSS] [nss-wifili]: pdev:000000003558ce3c radio_ifnum:31 scheme_id:0 radio_priority:1 
[  101.721005] wlan: [10691:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL
[  101.733551] wlan: [10691:I:ANY] __ol_ath_attach: soc(0x00000000d8aa77cc): soc1 pdev: wifi1
[  101.736120] wlan: [10691:I:ANY] ol_ath_cohost_bssid_ind_init: COHOSTED BSSID IND disabled for pdev[0]
[  101.740812] wlan: [10691:I:TIF] ol_ath_pdev_regdmn_init:  phy id = 0 Modes supported
[  101.750672] wlan: [10691:I:TIF] ol_ath_pdev_regdmn_init:  11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1
[  101.758449] wlan: [10691:I:TIF] ol_ath_pdev_regdmn_init:  Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2ghz = 0, hi_2ghz = 0 lo_5ghz = 5150, hi_5ghz = 5895
[  101.768816] wlan: [10691:I:MBSSIE] ieee80211_mbss_attach: :>
[  101.782614] wlan: [10691:I:MBSSIE] ieee80211_mbss_attach: :<ret:0
[  101.792798] wlan: [10691:I:ANY] wlan_scan_update_channel_list: num_chan: 25
[  101.794317] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
[  101.808999] wlan: [10691:I:ANY] ol_ath_pdev_host_trig_txbf_sounding_init: TxBF Standalone Sounding is not enabled
[  101.809638] wlan: [10691:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[  101.820239] wlan: [10691:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi1 features 41 
[  101.835722] wlan: [10691:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[  101.843603] remoteproc remoteproc3: remote processor cd00000.remoteproc:remoteproc_pd3 is now up
[  101.900370] wlan: [11292:F:DP] dp_rx_enable_mon_dest_frag: Feature DP_RX_MON_MEM_FRAG for mon_dest is enabled
[  102.047646] wlan: [11312:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:0 with soc_ops:0000000066083f59
[  102.048031] wlan: [11312:I:ANY] init_ath_pci_2_0: 6ath_ol_pci_2_0:  (Atheros/multi-bss)
[  105.447314] qca-wifi loaded
[  106.022345] ***** ACFG app not found: Fast boot is disabled *****
[  108.513021] ***** ACFG app not found: Fast boot is disabled *****
[  108.793709] ***** ACFG app not found: Fast boot is disabled *****
[  109.151530] ***** ACFG app not found: Fast boot is disabled *****
[  109.345867] ***** ACFG app not found: Fast boot is disabled *****
[  109.634124] ***** ACFG app not found: Fast boot is disabled *****
[  109.834787] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 7 Instance ID: 0x2 Value: 0
[  109.834831] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x2 Param 7 Value: 0
[  109.844197] cnss[2]: INFO: Starting QDSS for QCA5018
[  109.844205] cnss[2]: INFO: Sending QDSS config download message, state: 0x7
[  109.856993] cnss[2]: INFO: No Custom QDSS config found, loading default file IPQ5018/qdss_trace_config.bin
[  109.873249] cnss[2]: INFO: Sending QDSS Mode 1, option 0
[  110.423805] ***** ACFG app not found: Fast boot is disabled *****
[  110.732951] ***** ACFG app not found: Fast boot is disabled *****
[  111.133381] ***** ACFG app not found: Fast boot is disabled *****
[  111.424731] ***** ACFG app not found: Fast boot is disabled *****
[  113.053070] S95done (13227): drop_caches: 3
[  123.277556] wlan: [14816:I:ANY] wlan_scan_update_channel_list: num_chan: 13
[  123.277940] wlan: [14816:I:ANY] number of channels: 2G = 13 5G = 0, 6G = 0
[  123.284698] wlan: [14816:I:ANY] wlan_cfg80211_set_country: wlan_cfg80211_set_country: Country: DE ret: 0 
[  124.417240] wlan: [14954:I:ANY] ol_ath_set_config_param: set TXBF_SND_PERIOD: val 100 stat 0
[  124.647054] wlan: [0:I:RPTR] RPTR disconnect_timeout:10
[  124.712956] wlan: [0:I:RPTR] RPTR reconfiguration_timeout:60
[  125.542588] ***** ACFG app not found: Fast boot is disabled *****
[  126.404259] wlan: [15310:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[  126.404309] wlan: [15310:I:ANY] osifp_create_wlan_vap: No cloning
[  126.411793] wlan: [15310:I:ANY] osifp_create_wlan_vap: VDEV Create 94:83:c4:a7:77:c4
[  126.417875] wlan: [15310:I:ANY] wlan_vap_create: devhandle=0x0000000023d0eed2, opmode=IEEE80211_M_HOSTAP, flags=0x0
[  126.417875] 
[  126.428314] wlan: [15310:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 32 nss_id -1 
[  126.437821] wlan: [15310:I:ANY] osif_nss_ol_vap_create: NSS radio_if 30
[  126.446499] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[  126.452967] wlan: [15310:I:ANY] osif_nss_ol_vap_create: vap create 00000000d2b07da5 : if_num 32 
[  126.460996] wlan: [15310:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[  126.471408] wlan: [0:I:ANY] osif_nss_wifili_vdev_get_mpsta_vdevid: Get MPSTA: vdev is NULL
[  126.495306] wlan: [15310:I:ANY] WLAN-NSS: VAP NSS ops initialized 
[  126.495580] wlan: [15310:I:RPTR] RPTR vdev flags:0 pdev flags:0 vdev_id:0 pdev_id:0
[  129.517723] ***** ACFG app not found: Fast boot is disabled *****
[  129.781380] ***** ACFG app not found: Fast boot is disabled *****
[  129.946276] ***** ACFG app not found: Fast boot is disabled *****
[  135.756090] wlan: [17195:I:ANY] wlan_scan_update_channel_list: num_chan: 27
[  135.759533] wlan: [17195:E:ANY] dfs_init_chan_state_array: channel state array initialized
[  135.766917] wlan: [17195:I:ANY] wlan_scan_update_channel_list: num_chan: 27
[  135.772095] wlan: [17195:I:ANY] number of channels: 2G = 0 5G = 27, 6G = 0
[  135.777965] wlan: [17195:I:ANY] wlan_cfg80211_set_country: wlan_cfg80211_set_country: Country: DE ret: 0 
[  136.360159] wlan: [17224:I:ANY] ol_ath_set_config_param: set TXBF_SND_PERIOD: val 100 stat 0
[  136.569588] wlan: [0:I:RPTR] RPTR disconnect_timeout:10
[  136.627318] wlan: [0:I:RPTR] RPTR reconfiguration_timeout:60
[  137.322915] ***** ACFG app not found: Fast boot is disabled *****
[  137.731023] wlan: [17346:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[  137.731071] wlan: [17346:I:ANY] osifp_create_wlan_vap: No cloning
[  137.737648] wlan: [17346:I:ANY] osifp_create_wlan_vap: VDEV Create 94:83:c4:a7:77:c5
[  137.743784] wlan: [17346:I:ANY] wlan_vap_create: devhandle=0x000000003558ce3c, opmode=IEEE80211_M_HOSTAP, flags=0x0
[  137.743784] 
[  137.752746] wlan: [17346:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 28 nss_id -1 
[  137.763515] wlan: [17346:I:ANY] osif_nss_ol_vap_create: NSS radio_if 31
[  137.772926] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[  137.778903] wlan: [17346:I:ANY] osif_nss_ol_vap_create: vap create 0000000081edcf45 : if_num 28 
[  137.787607] wlan: [17346:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[  137.825206] wlan: [17346:I:ANY] WLAN-NSS: VAP NSS ops initialized 
[  137.825550] wlan: [17346:I:RPTR] RPTR vdev flags:0 pdev flags:0 vdev_id:0 pdev_id:0
[  142.154826] ***** ACFG app not found: Fast boot is disabled *****
[  142.260478] ***** ACFG app not found: Fast boot is disabled *****
[  142.373482] ***** ACFG app not found: Fast boot is disabled *****
[  143.779159] 8021q: adding VLAN 0 to HW filter on device wlan0
[  143.780669] br-lan: port 2(wlan0) entered blocking state
[  143.783887] br-lan: port 2(wlan0) entered disabled state
[  143.790487] device wlan0 entered promiscuous mode
[  143.795408] br-lan: port 2(wlan0) entered blocking state
[  143.799170] br-lan: port 2(wlan0) entered forwarding state
[  143.834226] wlan: [3893:I:ANY] wlan_cfg80211_do_acs: vap-0(wlan0):ACS Params
[  143.834266] wlan: [3893:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:29|chwidth:20|
[  143.840892] wlan: [3893:I:ANY] wlan_mbss_start_acs: ACS Arg: 000000004ad64267
[  144.309735] ***** ACFG app not found: Fast boot is disabled *****
[  145.630632] 8021q: adding VLAN 0 to HW filter on device wlan1
[  145.632541] br-lan: port 3(wlan1) entered blocking state
[  145.636507] br-lan: port 3(wlan1) entered disabled state
[  145.647641] device wlan1 entered promiscuous mode
[  145.648742] br-lan: port 3(wlan1) entered blocking state
[  145.651416] br-lan: port 3(wlan1) entered forwarding state
[  145.669907] wlan: [3893:I:ANY] wlan_cfg80211_do_acs: vap-0(wlan1):ACS Params
[  145.669954] wlan: [3893:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:30|chwidth:20|
[  145.676789] wlan: [3893:I:ANY] wlan_mbss_start_acs: ACS Arg: 000000004ad64267
[  146.706296] ***** ACFG app not found: Fast boot is disabled *****
[  147.968054] wlan: [0:I:ANY] ieee80211_acs_post_event: [EXT] Channel number: 00000000b674e666
[  147.968098] wlan: [0:I:ANY] wlan_mbss_done_acs: Channel: 00000000b674e666
[  147.975819] wlan: [0:I:ANY] vap-0(wlan0): ACS result PCH 6 freq 2437, SCH 10 freq 2457, hw_mode 1 chwidth 40, vht_seg0 8 freq 2447, vht_seg1 0 freq 0 puncture pattern ffff
[  147.983181] wlan: [9836:I:ANY] ieee80211_acs_scan_evhandler: [EXT] lock held duration (15ms)
[  148.114335] wlan: [3893:I:ANY] wlan_cfg80211_start_ap: Start wlan0 psoc:0 vdev:0
[  148.114404] wlan: [3893:I:ANY] DES SSID SET=neuby-van2
[  148.121115] wlan: [3893:I:ANY] desired hw mode: 29
[  148.127623] wlan: [3893:I:ANY] wlan_cfg80211_chan_to_phymode: band:0 width: 2 channel_cfreq: 2437 center_freq1: 2447 chandef.center_freq2: 0 flags: 256
[  148.130604] wlan: [3893:I:ANY] HT Support:000000008f9e391b VHT Support:0000000089d34f55 HE Support:00000000f3ae276a
[  148.158320] wlan: [3893:I:ANY] Max supported wireless mode: 3
[  148.158364] wlan: [3893:I:ANY] Phymode: 26 
[  148.158364] 
[  148.163167] wlan: [3893:I:ANY] ieee80211_ucfg_set_freq_internal: 
[  148.163167]  Channel is configured already!!
[  148.171264] wlan: [3893:I:MBSSIE] wlan_cfg80211_start_ap: Set tx-vap wlan0: vdev_id:0
[  148.180828] wlan: [3893:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled
[  148.188711] wlan: [3893:E:MLO_MGR] mlo_ap_get_bridge_vdev_list: Invalid input
[  148.208746] wlan: [0:D:dfs] Skip CAC on NON-DFS chan
[  148.209518] wlan: [0:I:CMN_MLME] mlme_ext_vap_up: VAP (wlan0) 94:83:c4:a7:77:c4 is up
[  149.746700] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 7 Instance ID: 0x2 Value: 0
[  149.746741] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x2 Param 7 Value: 0
[  149.765064] cnss[2]: INFO: Starting QDSS for QCA5018
[  149.765072] cnss[2]: INFO: QDSS is already started: 0x20007
[  150.369269] [add_dev_config 299]add node success. iface:modem_2_1, dev:wwan0, ifindex:14
[  154.135893] wlan: [0:I:ANY] ieee80211_acs_post_event: [EXT] Channel number: 00000000b674e666
[  154.135935] wlan: [0:I:ANY] wlan_mbss_done_acs: Channel: 00000000b674e666
[  154.143575] wlan: [0:I:ANY] vap-0(wlan1): ACS result PCH 36 freq 5180, SCH 44 freq 5220, hw_mode 2 chwidth 80, vht_seg0 42 freq 5210, vht_seg1 0 freq 0 puncture pattern ffff
[  154.151194] wlan: [9836:I:ANY] ieee80211_acs_scan_evhandler: [EXT] lock held duration (15ms)
[  154.174542] wlan: [3893:I:ANY] wlan_cfg80211_start_ap: Start wlan1 psoc:1 vdev:0
[  154.174615] wlan: [3893:I:ANY] DES SSID SET=neuby-van5
[  154.181538] wlan: [3893:I:ANY] desired hw mode: 30
[  154.186754] wlan: [3893:I:ANY] wlan_cfg80211_chan_to_phymode: band:1 width: 3 channel_cfreq: 5180 center_freq1: 5210 chandef.center_freq2: 0 flags: 544
[  154.191157] wlan: [3893:I:ANY] HT Support:0000000054ee835b VHT Support:000000005e9df26d HE Support:000000002eeb4ba7
[  154.204757] wlan: [3893:I:ANY] Max supported wireless mode: 3
[  154.215129] wlan: [3893:I:ANY] Phymode: 30 
[  154.215129] 
[  154.220996] wlan: [3893:I:ANY] ieee80211_ucfg_set_freq_internal: 
[  154.220996]  Channel is configured already!!
[  154.227071] wlan: [3893:I:MBSSIE] wlan_cfg80211_start_ap: Set tx-vap wlan1: vdev_id:0
[  154.237265] wlan: [3893:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled
[  154.245843] wlan: [3893:E:MLO_MGR] mlo_ap_get_bridge_vdev_list: Invalid input
[  154.654888] wlan: [0:W:ANY] ieee80211_set_ul_mumimo: Overriding UL MUMIMO configuration to 0 as per Target Capability for VDEV 0
[  154.655237] wlan: [0:D:dfs] Skip CAC on NON-DFS chan
[  154.666220] wlan: [0:I:CMN_MLME] mlme_ext_vap_up: VAP (wlan1) 94:83:c4:a7:77:c5 is up
[  472.474815] kmwan: Delete node:modem_2_1
[  508.516718] [add_dev_config 299]add node success. iface:modem_2_1, dev:wwan0, ifindex:14
[  549.623764] kmwan: Delete node:modem_2_1
[  582.713770] [add_dev_config 299]add node success. iface:modem_2_1, dev:wwan0, ifindex:14
[ 4453.290840] xhci-hcd xhci-hcd.0.auto: Received Host Event, Ring is probably full, dequeuing finished TRBs before continuing...
[ 4453.292397] xhci-hcd xhci-hcd.0.auto: Received Host Event, Ring is probably full, dequeuing finished TRBs before continuing...
[ 4453.302692] xhci-hcd xhci-hcd.0.auto: Received Host Event, Ring is probably full, dequeuing finished TRBs before continuing...